450 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.446

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 446 0450 ENG Lab2u

FACE GROOVING ISO 26622-1XMZ tSLifACE IM-HFIR-MC Tools for Internal Grooving and Turning with ISO 26622-1( ) Tapered Shank f 5.3 Left-hand shown ‘ WJ SS tC JE J, f6 Designation SS F1 d f l2 W min W max / IM40 HFIR-MC 40 80.0 25.00 11.3 52.0 3.00 6.00 SR M5X16 DIN912 HW 4.0 EZ 83 IM50 HFIR-MC 50 80.0 25.00 11.3 52.0 3.00 6.00 SR M5X16 DIN912 HW 4.0 EZ 83 ( ) Tools with orientation holes in the flange groove can be supplied on request DGN GRIP 4.. - 6.. inserts can be used only with right-hand tools, HGPL 4.. - 6.. inserts with left-hand tools. After initial groove, no limitation to widening groove outward or toward center. For user guide, see pages 460-470 For inserts, see pages: HFPR/L (447) HFPR/L (full radius) (448) GRIP (229) GRIP (full radius) (230) DGN/DGNC/DGNM-C (380) DGN/DGNM-J/JS/JT (381) DGN-W (381) isunGE HFIR/L-MC Boring Bars for Internal Grooving and Turning Designation d W min W max l1 f±0.10 h1 Tmax-a / HFIR 16MC 16.00 3.00 6.00 150.00 11.14 7.5 5.00 SR M5X16 DIN912 HW 4.0 PL 16 HFIR 20MC 20.00 3.00 6.00 170.00 11.14 9.0 5.00 SR M5X16 DIN912 HW 4.0 PL 20 HFIR/L 25MC 25.00 3.00 6.00 200.00 11.14 11.5 5.00 SR M5X16 DIN912 HW 4.0 PL 25 HFIR/L 32MC 32.00 3.00 6.00 250.00 14.68 14.5 5.00 SR M6X20 DIN912 HW 5.0 PL 32 HFIR/L 40MC 40.00 3.00 6.00 300.00 18.70 18.0 5.00 SR M6X20 DIN912 HW 5.0 PL 40 DGN GRIP 4.. - 6.. inserts can be used only with right-hand tools, HGPL 4.. - 6.. inserts with left-hand tools. After initial groove, no limitation to widening groove outward or toward center. For user guide, see pages 460-470 For inserts, see pages: HFPR/L (447) HFPR/L (full radius) (448) GRIP (229) GRIP (full radius) (230) DGN/DGNC/DGNM-C (380) DGN/DGNM-J/JS/JT (381) DGN-W (381) HGPL (449) Boring Internal Face Grooving Internal Face Recessing u 1 ) Boring, Face Grooving Face Recessing Capacity Boring Face Grooving Face Recessing B Min.=F+d/2+W/2+2G D Min.=2F+d+W-B+2G P Min.=2F+d-W-B+2G HFIR/L-: MC Integral Boring bars For shallow, internal face machining to max. 5 mm depth of groove. One boring bar can be mounted with inserts in 4-6 mm widths. The initial major diameter groove is limited by the insert’s geometry in each size. After the initial groove, face recessing outward or toward center is not limited by the insert’s geometry. Insert Initial Face Grooving Range D W Min. Max. 4 23 90 5 21 300 6 20 (1) The minimum recommended value for clearance (G) is 0.5 mm 446 ISCAR