448 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.444

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 444 0448 ENG Lab2u

FACE GROOVING 444 tSUFACE HGAIR/L-3 Adapters for Internal Face Grooving and Turning Designation Tmax-a D1 min(1) D1 max(2) W l1 f1 l2 HGAIR/L 12-3M 2.00 12.0 500.0 3.00 55.00 10.2 21.0 SR 16-236 P T-15/3 HGAIR/L 12-3T6 6.00 12.0 15.0 3.00 55.00 10.2 21.0 SR 16-236 P T-15/3 HGAIR/L 14-3T7 7.00 14.0 17.0 3.00 55.00 10.2 21.0 SR 16-236 P T-15/3 HGAIR/L 17-3T8 8.00 17.0 21.0 3.00 55.00 10.2 21.0 SR 16-236 P T-15/3 HGAIR/L 21-3T9 9.00 21.0 25.0 3.00 55.00 10.2 21.0 SR 16-236 P T-15/3 HGAIR/L 25-3T9 9.00 25.0 34.0 3.00 55.00 10.2 21.0 SR 16-236 P T-15/3 HGAIR/L 35-3T10 10.00 35.0 45.0 3.00 56.00 10.3 22.0 SR 16-236 P T-15/3 HGAIR/L 45-3T10 10.00 45.0 65.0 3.00 56.00 10.3 22.0 SR 16-236 P T-15/3 HGAIR/L 65-3T18 18.00 65.0 115.0 3.00 64.00 11.3 30.0 SR 16-236 P T-15/3 HGAIR/L 115-3T18 18.00 115.0 400.0 3.00 64.00 11.3 30.0 SR 16-236 P T-15/3 HGN GRIP 3.. inserts can be used only with right-hand adapters, HGPL 3.. inserts with left-hand adapters. For user guide, see pages 460-470 (1) Minimum penetration diameter (2) Maximum penetration diameter For inserts, see pages: GRIP (229) GRIP (full radius) (230) HGN-C (386) HGN-J (386) HGN-UT (387) HGPL (449) For holders, see pages: C -HAD (480) C -HAPR/L (480) HAI-C (445) HAPR/L (440) HAR/L (440) IM-HAD (484) IM-HAPR/L (484) tSUFACE HFAIR/L-4 Adapters for Internal Face Grooving and Turning Designation Tmax-a W D1 min(1) D1 max(2) l1 f1 l2 / HFAIR/L 34-4T18 18.00 4.00 34.0 40.0 67.00 15.3 33.0 SR M5X16 DIN912 HW 4.0 HFAIR/L 40-4T20 20.00 4.00 40.0 48.0 67.00 15.3 33.0 SR M5X16 DIN912 HW 4.0 HFAIR/L 48-4T20 20.00 4.00 48.0 60.0 67.00 15.3 33.0 SR M5X16 DIN912 HW 4.0 HFAIR/L 60-4T25 25.00 4.00 60.0 75.0 67.00 15.3 33.0 SR M5X16 DIN912 HW 4.0 DGN GRIP inserts can be used only with right-hand adapters, HGPL inserts with left-hand blades. For user guide, see pages 460-470 (1) Minimum penetration diameter (2) Maximum penetration diameter For inserts, see pages: HFPR/L (447) HFPR/L (full radius) (448) GRIP (229) GRIP (full radius) (230) DGN/DGNC/DGNM-C (380) DGN/DGNM-J/JS/JT (381) HGPL (449) For holders, see pages: C -HAD (480) C -HAPR/L (480) HAI-C (445) HAPR/L (440) HAR/L (440) IM-HAD (484) IM-HAPR/L (484) CAMFIX C -HFIR/L-MC Boring Bars for Internal Grooving and Turning with CAMFIX Exchangeable Shanks Designation W min W max SS f l2 F1 d / C4 HFIR/L-MC 3.00 6.00 40 11.3 52.0 80.0 25.00 SR M5X16 DIN912 HW 4.0 EZ 83 C5 HFIR/L-MC 3.00 6.00 50 11.3 52.0 80.0 25.00 SR M5X16 DIN912 HW 4.0 EZ 83 DGN GRIP 4.. - 6.. inserts can be used only with right-hand tools, HGPL 4.. - 6.. inserts with left-hand tools. After initial groove, no limitation to widening groove outward or toward center. For user guide, see pages 460-470 For inserts, see pages: HFPR/L (447) HFPR/L (full radius) (448) GRIP (229) GRIP (full radius) (230) DGN/DGNC/DGNM-C (380) DGN/DGNM-J/JS/JT (381) DGN-W (381) HGPL (449) ISCAR