447 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.443

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 443 0447 ENG Lab2u

fsuacE USER GUIDE Boring Bars for Adapters HGAIR/L HFAIR/L Adapters and HAI Holders Adapter clamped on HAI round shank holders can machine deep internal boring and grooving applications. The tool can bore down to the bottom, and is supplied with internal coolant for better performance. HFAIR/L HGAIR/L Exchangeable adapters, see pages B268, B270. HAI Holders for adapters, see page B269. HFAIR/L HGAIR/L - C - T - HELIFACE Min. initial Internal Insert Max. depth Internal adapters right or left groove diameter coolant width of groove HAI Holder System Assembly HFAIL HGAIL Left-hand Adapters The same HAI boring bar can be used with right- and left-hand adapters in a wide range of face machining applications. The two screws and the central guiding Coolant System HFAIR HGAIR Right-hand Adapters slot on the adapter correspond to the key and holes on the holder ensuring strong, safe, and accurate clamping. O O Coolant Inlet T Connector Seal HAI HGAIR/L HFAIR/L (1) Connector for coolant inlet BSP 1/8 thread. For PL-20, use M6 thread. Connector not supplied with tools. Member IMC Group kSSII t FACE GROOVING