449 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.445

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 445 0449 ENG Lab2u

445 fSUKACE HAI-C Boring Bars with Coolant Holes for Internal Grooving and Turning Adapters Designation HAI 20 HAI 25C HAI 32C HAI 40C d 20.00 25.00 32.00 40.00 l1 130.00 150.00 200.00 250.00 h1 f2 6 9.0 11.5 14.5 18.0 0.50 3.00 6.50 10.50 SR 14-519 SR 14-519 SR 14-519 SR 14-519 T-20/3 T-20/3 T-20/3 T-20/3 The HAI boring bars can be used with right and left-hand adapters. (a) Tmax - see corresponding adapters. For tools, see pages: HFAIR/L-4 (444) HFAIR/L-DG (445) HGAIR/L-3 (444) PL 25 PL 32 PL 40 fSSJOCE HFAIR/L-DG Adapters for Internal Face Grooving and Turning Designation W D1 min(1) D1 max(2) T max-a f1 l2 l1 HFAIR/L 75C-4T30DG 4.00 75.0 140.0 30.00 10.9 34.5 68.50 EDG 33B HFAIR/L 140C-4T30DG 4.00 140.0 - 30.00 10.9 34.5 68.50 EDG 33B HFAIR/L 55C-5T25DG 5.00 55.0 70.0 25.00 11.9 32.0 66.00 EDG 33B HFAIR/L 70C-5T25DG 5.00 70.0 95.0 25.00 11.9 32.0 66.00 EDG 33B HFAIR/L 95C-5T35DG 5.00 95.0 130.0 35.00 11.9 39.5 73.50 EDG 33B HFAIR/L 130C-5T38DG 5.00 130.0 180.0 38.00 11.9 42.5 76.50 EDG 33B HFAIR/L 180C-5T38DG 5.00 180.0 - 38.00 11.9 42.5 76.50 EDG 33B HFAIR/L 70C-6T28DG 6.00 70.0 100.0 28.00 12.0 35.0 69.00 EDG 33B HFAIR/L 100C-6T32DG 6.00 100.0 180.0 32.00 12.0 39.0 73.00 EDG 33B HFAIR/L 180C-6T38DG 6.00 180.0 400.0 38.00 12.4 42.5 76.50 EDG 33B After initial groove, no limitation to widening groove outward or toward center DGN inserts can be used on right- and left-hand tools, GRIP inserts only on right-hand tools, HFPR/L right-hand inserts on right-hand tools (same for left-hand), and HGPL inserts only on left-hand tools. (1) Minimum penetration diameter (2) Maximum penetration diameter Optional, should be ordered separately For inserts, see pages: HFPR/L (447) HFPR/L (full radius) (448) GRIP (229) GRIP (full radius) (230) DGN/DGNC/DGNM-C (380) DGN/DGNM-J/JS/JT (381) DGN-W (381) HGPL (449) For holders, see pages: C -HAD (480) C -HAPR/L (480) HAI-C (445) HAPR/L (440) HAR/L (440) IM-HAD (484) IM-HAPR/L (484) Adapters can be used for internal machining along bore. Adapters can be mounted on standard HAI boring bars for internal machining and on HAR/L, HAPR/L holders for external machining Boring, Face Grooving Face Recessing Capacity Boring Face Grooving Face Recessing B Min. =F+G+d/2 D Min. =2F-B+2G+d P Min. =2F-B-2W+2G+d Dmin. Ql1) r //////// ///, f I 1 / / D 1 ///Z7 '/// F min. G(1) r 4 1 B - / / / i I4 1 //////// (1) The minimum recommended value for clearance (G) is 0.5 mm FACE GROOVING