446 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.442

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 442 0446 ENG Lab2u

FACE GROOVING 442 fSLSOCE HFHR/L-M Toolholders for Shallow Face Grooving Designation W min W max Tmax-a f h b l1 D1 min(1) D1 max(2) H2 A1 / HFHR/L 20M 3.00 6.00 5.30 20.0 20.0 20.0 130.00 20.0 2000.0 29.0 22.50 SR M6X16 DIN912 HW 5.0 HFHR/L 25M 3.00 6.00 5.30 25.0 25.0 25.0 150.00 20.0 2000.0 34.0 27.50 SR M6X16 DIN912 HW 5.0 DGN GRIP 4.. - 6.. inserts can be used only with right-hand tools, HGPL 4.. - 6.. inserts with left-hand tools. After initial groove, no limitation to widening groove outward or toward center. For user guide, see pages 460-470 (1) Minimum penetration diameter (2) Maximum penetration diameter For inserts, see pages: HFPR/L (447) HFPR/L (full radius) (448) hfhr/l-Dm hfhpr/l-Dm Integral Toolholders For shallow machining up to max. 5 mm depth of groove. One toolholder can be mounted with inserts in 3-6 mm widths. The initial major diameter groove is limited by the insert geometry in each size. After initial groove, face recessing outward or toward center is not limited by insert geometry. Insert initial face grooving range D1 W Min. Max. 3 25.6 51.5 4 24.1 73.7 5 22.1 170 6 20.8 fSUfACE HFHPR/L-M Perpendicular Toolholders for Shallow Face Grooving Designation W min W max Tmax-a f h b l1 D1 min(1) D1 max(2) H2 / HFHPR/L 20M 3.00 6.00 5.00 25.3 20.0 20.0 130.00 20.0 2000.0 29.0 SR M6X16 DIN912 HW 5.0 HFHPR/L 25M 3.00 6.00 5.00 30.3 25.0 25.0 150.00 20.0 2000.0 34.0 SR M6X16 DIN912 HW 5.0 DGN GRIP 4.. - 6.. inserts can be used only with right-hand tools, HGPL 4.. - 6.. inserts with left-hand tools. After initial groove, no limitation to widening groove outward or toward center. For user guide, see pages 460-470 (1) Minimum penetration diameter (2) Maximum penetration diameter For inserts, see pages: HFPR/L (447) HFPR/L (full radius) (448) ISCAR