443 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.439

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 439 0443 ENG Lab2u

439 MODULAR-GniF HFPAD-5 Adapters for Face Machining Designation D1 min(1) D1 max(2) W T max-a l2 f2 A2 l1 h1 B1 HFPAD 5R/L-40-T14 40.0 50.0 5.00 14.00 16.0 4.50 6.3 40.50 24.0 32.0 HFPAD 5R/L-50-T14 50.0 75.0 5.00 14.00 16.0 4.50 6.3 40.50 24.0 32.0 HFPAD 5R/L-75-T14 75.0 110.0 5.00 14.00 16.0 4.50 6.3 40.50 24.0 32.0 HFPAD 5R/L-110-T14 110.0 200.0 5.00 14.00 16.0 4.50 6.3 40.50 24.0 32.0 HFPAD 5R/L-200-T20 200.0 800.0 5.00 20.00 21.0 4.50 6.6 45.50 24.0 32.0 f(a)=f1(shank) + f2(adapter) DGN GRIP 5.. inserts can be used only with right-hand adapters, HGPL 5.. inserts with left-hand adapters. For user guide, see pages 460-470 (1) Minimum penetration diameter (2) Maximum penetration diameter For inserts, see pages: HFPR/L (447) HFPR/L (full radius) (448) GRIP (229) GRIP (full radius) (230) DGN/DGNC/DGNM-C (380) DGN/DGNM-J/JS/JT (381) DGN-W (381) HGPL (449) For holders, see pages: C -MAHD-JHP (479) C -MAHPD-JHP (480) MAHR/L-JHP-MC (236) MAHPR/L-JHP (237) MAHR/L-JHP (236) MAHR/L (235) MAHPR/L (237) C -MAHD (479) C -MAHDOR (478) C -MAHPD (480) C -MAHUR/L (479) C -MAHDR-45 (478) HSK A63WH-MAHUR/L (482) HSK A63WH-MAHDR-45 (481) HSK A63WH-MAHDOR (482) IM-MAHD (483) IM-MAHPD (483) MODULAR-GniF HFPAD-6 Adapters for Face Machining Designation HFPAD 6R/L-60-T14 HFPAD 6R/L-100-T20 HFPAD 6R/L-200-T20 D1 min(1) D1 max(2) W Tmax-a l2 _f2 _A2 _h_h _Bl 60.0 100.0 6.00 14.00 16.0 4.50 6.8 40.50 24.0 32.0 100.0 200.0 6.00 20.00 21.0 4.50 6.8 45.50 24.0 32.0 200.0 3000.0 6.00 20.00 21.0 4.50 7.1 45.50 24.0 32.0 f(a)=f1(shank) + f2(adapter) DGN GRIP 6.. inserts can be used only with right-hand adapters, HGPL 6.. inserts with left-hand adapters. For user guide, see pages 460-470 (1) Minimum penetration diameter (2) Maximum penetration diameter For inserts, see pages: HFPR/L (447) HFPR/L (full radius) (448) GRIP (229) GRIP (full radius) (230) DGN/DGNC/DGNM-C (380) DGN/DGNM-J/JS/JT (381) HGPL (449) For holders, see pages: C -MAHD-JHP (479) C -MAHPD-JHP (480) MAHR/L-JHP-MC (236) MAHPR/L-JHP (237) MAHR/L-JHP (236) MAHR/L (235) MAHPR/L (237) C -MAHD (479) C -MAHPD (480) C -MAHUR/L (479) C -MAHDR-45 (478) C -MAHDOR (478) HSK A63WH-MAHUR/L (482) HSK A63WH-MAHDR-45 (481) HSK A63WH-MAHDOR (482) IM-MAHD (483) IM-MAHPD (483) fsuncE HFFR/L-T Blades for Face Machining Designation W D1 min(2) D1 max(3) Tmax-a l1 B1 A2 HFFR/L 48-4T25 <1> 4.00 48.0 60.0 25.00 150.00 32.0 5.2 EDG 33B HFFR/L 60-4T25 4.00 60.0 75.0 25.00 150.00 32.0 5.2 EDG 33B HFFR/L 75-4T30 4.00 75.0 140.0 30.00 150.00 32.0 5.2 EDG 33B HFFR/L 140-4T30 4.00 140.0 1500.0 30.00 150.00 32.0 3.2 EDG 33B HFFR/L 70-5T32 5.00 70.0 95.0 32.00 150.00 32.0 5.2 EDG 33B HFFR/L 95-5T35 5.00 95.0 130.0 35.00 150.00 32.0 5.2 EDG 33B HFFR/L 130-5T38 5.00 130.0 180.0 38.00 150.00 32.0 5.2 EDG 33B HFFR/L 180-5T38 5.00 180.0 1500.0 38.00 150.00 32.0 4.0 EDG 33B HFFR/L 90-6T32 6.00 90.0 180.0 32.00 150.00 32.0 5.2 EDG 33B HFFR/L 180-6T38 6.00 180.0 400.0 38.00 150.00 32.0 5.2 EDG 33B After initial groove, no limitation to widening groove outward or toward center. DGN GRIP inserts can be used only with right-hand adapters, HGPL inserts with left-hand blades. For user guide, see pages 460-470 (1) HGPL 4...Y with LH blade. (2) Minimum penetration diameter (3) Maximum penetration diameter Optional, should be ordered separately For inserts, see pages: HFPR/L (447) HFPR/L (full radius) (448) GRIP (229) GRIP (full radius) (230) DGN/DGNC/DGNM-C (380) DGN/DGNM-J/JS/JT (381) DGN-W (381) HGPL (449) For holders, see pages: SGTBF (473) SGTBU/SGTBN (472) UBHCR/L (473) FACE GROOVING