445 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.441

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 441 0445 ENG Lab2u

441 MODULAR-GniF HFPAD-4 Adapters for Face Machining Designation D1 min(1) D1 max(2) W T max-a l2 f2 A2 l1 HFPAD 4R/L-25-T10 25.0 31.0 4.00 10.00 16.0 4.50 5.8 40.50 HFPAD 4R/L-31-T10 31.0 44.0 4.00 10.00 16.0 4.50 5.8 40.50 HFPAD 4R/L-44-T14 44.0 58.0 4.00 14.00 16.0 4.50 5.8 40.50 HFPAD 4R/L-58-T14 58.0 88.0 4.00 14.00 16.0 4.50 5.8 40.50 HFPAD 4R/L-88-T14 88.0 175.0 4.00 14.00 16.0 4.50 5.8 40.50 HFPAD 4R/L-175-T20 175.0 800.0 4.00 20.00 21.0 4.50 6.5 45.50 f(a)=f1(shank) + f2(adapter) DGN GRIP 4.. inserts can be used only with right-hand adapters, HGPL 4.. inserts with left-hand adapters. For user guide, see pages 460-470 (1) Minimum penetration diameter (2) Maximum penetration diameter For inserts, see pages: HFPR/L (447) HFPR/L (full radius) (448) GRIP (229) GRIP (full radius) (230) DGN/DGNC/DGNM-C (380) DGN/DGNM-J/JS/JT (381) HGPL (449) For holders, see pages: C -MAHD-JHP (479) C -MAHPD-JHP (480) MAHR/L-JHP-MC (236) MAHPR/L-JHP (237) MAHR/L-JHP (236) MAHR/L (235) MAHPR/L (237) C -MAHD (479) C -MAHPD (480) C -MAHUR/L (479) C -MAHDR-45 (478) C -MAHDOR (478) HSK A63WH-MAHUR/L (482) HSK A63WH-MAHDR-45 (481) HSK A63WH-MAHDOR (482) IM-MAHD (483) IM-MAHPD (483) fSLSOCE HFAER/L-5T, 6T Adapters for External Facing Along Shafts Designation W Tmax-a D1 min(1) D1 max(2) l1 f1 HFAER/L 70C-5T25 5.00 25.00 70.0 95.0 66.00 12.2 EDG 33B HFAER/L 95C-5T25 5.00 25.00 95.0 130.0 66.00 12.2 EDG 33B HFAER/L 70C-6T28 6.00 28.00 70.0 100.0 69.00 12.3 EDG 33B HFAER/L100C-6T32 6.00 32.00 100.0 180.0 73.00 12.3 EDG 33B HFAER/L180C-6T32 6.00 32.00 180.0 400.0 73.00 12.3 EDG 33B After initial groove, no limitation to widening groove outward from or toward center. Adapters can be mounted on standard HAR/L, HAPR/L, HAI holders for external machining. DGN GRIP inserts can be used only with right-hand adapters, HGPL inserts with left-hand blades. For user guide, see pages 460-470 (1) Minimum penetration diameter (2) Maximum penetration diameter Optional, should be ordered separately For inserts, see pages: HFPR/L (447) HFPR/L (full radius) (448) GRIP (229) GRIP (full radius) (230) DGN/DGNC/DGNM-C (380) DGN/DGNM-J/JS/JT (381) DGN-W (381) HGPL (449) For holders, see pages: C -HAD (480) C -HAPR/L (480) HAPR/L (440) HAR/L (440) IM-HAD (484) IM-HAPR/L (484) FACE GROOVING