451 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.447

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 447 0451 ENG Lab2u

tSUFACE CR HFIR-M Cartridges for Face Grooving and Turning 9 h o P b L 1 JE w J, Right-hand shown Designation CR HFIR-16M CR HFIR-20M W min _W max hi _b _h 1 _f T max-a 3.00 600 160 160 20.0 67.00 200 5.00 3.0 0 6.00 _20.0 _20.0 _24.0 _72.00 24.0 _5.00 Used for shallow internal face machining to max. 5 mm depth of groove Inserts in 3-6 mm widths can be mounted on the cartridges Only DGN GRIP 4.. -6.. inserts can be used with the right-hand tools For inserts, see pages: HFPR/L (447) HFPR/L (full radius) (448) GRIP (229) GRIP (full radius) (230) DGN/DGNC/DGNM-C (380) DGN/DGNM-J/JS/JT (381) DGN-W (381) CR-HFIR/L-M Assembly Dimensions Desjgnatjo l E L11 F2 _Rmax. Assembly Screw(3) 25 8 20 6 M8X30 30 10 24 6 M8X30 L adjustment ± 1 F adjustment +0.3 (3) Assembly screws ISO 7380 are recommended Spare Parts Designation CR HFIR-16M SR M5X20DIN912 HW 4.0 SR 76-1401 SR M4X10 DIN916 HW 2.0 CR HFIR-20M SR M5X20DIN912 HW 4.0 SR 76-1401 SR M4X10 DIN913 HW 2.0 fSLiFACE HFPN Utility Double-Ended Face Machining Inserts CR HFIR/L-16M CR HFIR/L-20M Dimensions Recommended Machining Data Designation W±004 R l Ref. 0 8 IC f groove (mm/rev) HFPN 2002 2.00 0.20 19.40 0.03-0.10 HFPN 2010 2.00 1.00 19.40 0.03-0.10 For cutting speed recommendations and user guide, see pages 460-470 For tools, see pages: HFFA (435) HFFH (435) fSUEACE HFPR/L Utility Double-Ended Face Machining Inserts ±0'1 p-19 Rei' J, w JE C No depth penetration limit Dimensions Tough Hard Designation W±0.05 R±°.°5 M D1 min D1 max IC328 IC830 IC354 2 8 IC IC808 0 IC IC20 0 5 IC