453 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.449

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 449 0453 ENG Lab2u

&LbGniP GRIP (full radius) Utility Double-Ended Full Radius Inserts for External, Internal and Face Machining li_ J m 3 No depth penetration limit Dimensions Tough Hard Recommended Machining Data Designation W±0.05 R±°.°5 l M IC830 IC8250 8 0 IC IC808 IC908 IC418 IC5010 0 8 IC ap (mm) f turn (mm/ rev) f groove (mm/ rev) f face-groove (mm/ rev) f face-turn (mm/ rev) GRIP 3015Y 3.00 1.50 15.80 2.10 0.00-1.50 0.18-0.26 0.07-0.13 0.08-0.20 0.10-0.20 GRIP 318-159Y 3.18 1.59 16.00 2.30 0.00-1.50 0.19-0.28 0.07-0.13 0.08-0.20 0.10-0.20 GRIP 4020Y 4.00 2.00 19.00 2.80 0.00-2.00 0.20-0.34 0.09-0.17 0.10-0.24 0.15-0.30 GRIP 476-238Y 4.76 2.38 19.00 3.20 0.00-2.30 0.21-0.40 0.10-0.20 0.10-0.24 0.15-0.30 GRIP 5025Y 5.00 2.50 19.00 3.40 0.00-2.50 0.23-0.42 0.11-0.21 0.12-0.24 0.15-0.35 GRIP 6030Y 6.00 3.00 19.00 4.20 0.00-3.00 0.24-0.50 0.13-0.25 0.12-0.28 0.15-0.40 GRIP 635-318Y 6.35 3.18 19.00 4.00 0.00-3.10 0.25-0.53 0.14-0.27 0.12-0.28 0.15-0.40 For cutting speed recommendations and user guide, see pages 460-470 For tools, see pages: C -HELIR/L (225) C -HFIR/L-MC (444) CR HFIR-M (447) DGAD/HGAD (378) DGFH (228) DGFH-JHP (229) DGFS (372) DGTR/L (376) HELIIR/L (301) HELIR/L (226) HFAER/L-4 (440) HFAER/L-5T, 6T (441) HFAIR/L-4 (444) HFAIR/L-DG (445) HFFR/L-T (439) HFHR/L-4T (437) HFHR/L-5T (437) HFHR/L-6T (438) HFIR/L-MC (446) HFPAD-3 (438) HFPAD-4 (441) HFPAD-5 (439) HFPAD-6 (439) HGAER/L-3 (440) HGAIR/L-3 (444) HGFH (227) HGHR/L-3 (436) HGPAD (227) HGPAD-JHP (227) IM-HFIR-MC (446) tSLifACE HGPL Utility Double-Ended Inserts for Face Machining 0=k l Ref. i - Wp- £1 -tG w J JE Dimensions Tough Hard Recommended Machining Data Designation W±°.°3 M R±°.°5 l IC328 IC354 8 0 IC IC808 IC908 ap (mm) f face-groove (mm/rev) f face-turn (mm/rev) HGPL 3015Y 3.00 2.10 1.50 16.00 0.00-1.50 0.08-0.20 0.12-0.23 HGPL 3002Y 3.00 2.30 0.20 16.00 0.24-1.80 0.08-0.20 0.12-0.23 HGPL 3003Y 3.00 2.30 0.30 16.00 0.36-1.80 0.08-0.20 0.12-0.23 HGPL 4002Y 4.00 2.80 0.20 19.00 0.24-2.40 0.10-0.24 0.16-0.30 HGPL 4004Y 4.00 2.80 0.40 19.00 0.48-2.40 0.10-0.24 0.16-0.30 HGPL 4020Y 4.00 2.80 2.00 19.00 0.00-2.00 0.10-0.24 0.16-0.30 HGPL 5005Y 5.00 3.30 0.50 19.00 0.60-3.00 0.12-0.24 0.20-0.38 HGPL 5025Y 5.00 3.30 2.50 19.00 0.00-2.50 0.12-0.24 0.20-0.38 HGPL 6005Y 6.00 4.20 0.50 19.00 0.60-3.60 0.12-0.28 0.24-0.45 HGPL 6005Y 6.00 4.20 0.50 19.00 0.60-3.60 0.12-0.28 0.24-0.45 HGPL 6030Y 6.00 4.20 3.00 19.00 0.00-3.00 0.12-0.28 0.24-0.45 No depth penetration limit For cutting speed recommendations and user guide, see pages 460-470 For tools, see pages: C -HFIR/L-MC (444) HFAER/L-4 (440) HFAER/L-5T, 6T (441) HFAIR/L-4 (444) HFAIR/L-DG (445) HFFR/L-T (439) HFHR/L-4T (437) HFHR/L-5T (437) HFHR/L-6T (438) HFIR/L-MC (446) HFPAD-3 (438) HFPAD-4 (441) HFPAD-5 (439) HFPAD-6 (439) HGAER/L-3 (440) HGAIR/L-3 (444) HGHR/L-3 (436) 449 FACE GROOVING