452 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.448

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 448 0452 ENG Lab2u

FACE GROOVING 448 fSUKACE HFPR/L (full radius) Utility Double-Ended Full Radius Face Machining Inserts 19Ref wC J JJ j£ No depth penetration limit. Designation Dimensions Tough Hard Recommended Machining Data W±0.05 R±°.°5 M D1 min D1 max IC830 IC354 IC8250 IC808 IC9015 0 2 IC IC5010 IC428 ap (mm) f face-groove (mm/rev) f face-turn (mm/rev) HFPR/L 3015 3.00 1.50 2.10 25.6 51.5 0.00-1.50 0.08-0.20 0.12-0.20 HFPR/L 4020 4.00 2.00 2.80 24.1 73.7 0.00-2.00 0.10-0.24 0.15-0.25 HFPR/L 5025 5.00 2.50 3.40 22.1 170.0 0.00-2.50 0.12-0.24 0.15-0.35 HFPR/L 6030 6.00 3.00 4.00 20.8 - 0.00-3.00 0.12-0.28 0.20-0.40 For cutting speed recommendations and user guide, see pages 460-470 For tools, see pages: C -HFIR/L-MC (444) CR HFIR-M (447) HFAER/L-4 (440) HFAER/L-5T, 6T (441) HFAIR/L-4 (444) HFAIR/L-DG (445) HFFR/L-T (439) HFHPR/L-M (442) HFHR/L-3T (436) HFHR/L-4T (437) HFHR/L-5T (437) HFHR/L-6T (438) HFHR/L-M (442) HFIR/L-MC (446) HFPAD-4 (441) HFPAD-5 (439) HFPAD-6 (439) IM-HFIR-MC (446) GRIP Utility Double-Ended Inserts for External, Internal and Face Machining 'Or, n r j No depth penetration limit R W Dimensions Tough Hard Recommended Machining Data Designation W±°.°5 R±°.°5 l M IC830 IC8250 8 0 IC IC808 IC908 IC418 IC5010 0 8 IC ap (mm) f turn (mm/rev) f groove (mm/rev) f face-groove (mm/rev) f face-turn (mm/rev) GRIP 3002Y 3.00 0.20 16.00 2.30 0.25-1.80 0.14-0.18 0.07-0.11 0.08-0.20 0.10-0.20 GRIP 3003Y 3.00 0.30 16.00 2.30 0.40-1.80 0.15-0.19 0.07-0.11 0.08-0.20 0.10-0.20 GRIP 318-040Y 3.18 0.40 16.00 2.30 0.50-1.90 0.17-0.22 0.07-0.12 0.08-0.20 0.10-0.20 GRIP 4002Y 4.00 0.20 19.00 2.80 0.25-2.40 0.16-0.21 0.09-0.14 0.10-0.24 0.15-0.30 GRIP 4004Y 4.00 0.40 19.00 2.80 0.50-2.40 0.18-0.24 0.09-0.15 0.10-0.24 0.15-0.30 GRIP 476-080Y 4.76 0.80 19.00 3.10 1.00-2.80 0.21-0.33 0.10-0.20 0.10-0.24 0.15-0.30 GRIP 5005Y 5.00 0.50 19.00 3.30 0.60-3.00 0.20-0.30 0.11-0.20 0.12-0.24 0.15-0.35 GRIP 5008Y 5.00 0.80 19.00 3.40 1.00-3.00 0.23-0.35 0.11-0.21 0.12-0.24 0.15-0.35 GRIP 6005Y 6.00 0.50 19.00 4.20 0.60-3.60 0.22-0.36 0.13-0.23 0.12-0.28 0.15-0.40 GRIP 6008Y 6.00 0.80 19.00 4.20 1.00-3.60 0.24-0.42 0.13-0.25 0.12-0.28 0.15-0.40 GRIP 635-080Y 6.35 0.80 19.00 4.20 1.00-3.80 0.25-0.44 0.14-0.27 0.12-0.28 0.15-0.40 For cutting speed recommendations and user guide, see pages 460-470 For tools, see pages: C -HELIR/L (225) C -HFIR/L-MC (444) CR HFIR-M (447) DGAD/HGAD (378) DGFH (228) DGFH-JHP (229) DGFS (372) DGPAD-XL-JHP (379) DGTR/L (376) HELIIR/L (301) HELIR/L (226) HFAER/L-4 (440) HFAER/L-5T, 6T (441) HFAIR/L-4 (444) HFAIR/L-DG (445) HFFR/L-T (439) HFHR/L-4T (437) HFHR/L-5T (437) HFIR/L-MC (446) HFPAD-3 (438) HFPAD-4 (441) HFPAD-5 (439) HFPAD-6 (439) HGAER/L-3 (440) HGAIR/L-3 (444) HGFH (227) HGHR/L-3 (436) HGPAD (227) HGPAD-JHP (227) IM-HFIR-MC (446) The double-ended, twisted insert body makes it possible to machine deeper than the inserts’ length. A unique chipformer for controlled chip flow in axial and radial directions. The rear angle is slanted in relation to the frontal edge so it does not come into contact with the machined groove surface as the tool penetrates deeply into the workpiece. ISCAR The Twisted Insert for Face Machining