726 Каталог HOFFMANN GROUP 2015 Инструмент режущий слесарный измерительный Стр.726

Каталог HOFFMANN GROUP 2015 Tools Инструменты Ver 46 Стр. 726 0726 ENG Lab2u

HOLEX AfflPd) Marking tool Version 35 8740-8752- Advantage 35 8740-8752 - Application 35 8740-8752- Body of aluminium with Weldon shank. Stepless adjustment of the pre-load force. Character depth 0.1 - 0.3 mm. Surface sealing without weakening or damaging the material. Inscription speeds correspond to the maximum feed rate. High wear resistance, with long working life for the special needles. Suitable for inscriptions on round surfaces. Can be used on the lathe. High process reliability. Needles easily withdrawn, therefore quick needle change. Marking tool for identification on a vide variety of materials such as aluminium, titanium, steel, bronze, copper, brass, plastics etc. Irregularities up to 7 mm in the workpiece surface (depending on the profile) can be compensated. Supplied with 35 8740- Size 12 - including 3 needles No. 358745 size 0.3 - 0.5 - 0.8. Size 20 - including 3 needles No. 358745 size 0.3 - 0.6 - 1.0. Note 35 8740-8752- Smaller needle tips allow inscriptions on harder surfaces. HOLEX marking points Shank 0d 12 20 3 35 8740 holcX. Marker L mm 3 3 0 D, mm 66 73 AMF marker Note Order marking needle No. 358755 - 358759 separately. Radius mm 0,3 0,5 0,6 0,8 1,0 H 35 8745 holoC. Spare needle Fits 358740 358740 358740 358740 358740 L, mm L mm 0 D, mm 0 d mm 0 D mm 358751 AMF marker XL 124 113 4 20 46 "358752 AMF marker L 119 108 3 20 42 0 D, mm 3 4 0D2 mm L, mm R, mm 358755 0.0 53.5 O Ln “358756 Amp( > Marking needle 0.0 53.5 1.0 35 8757 0.1 53.5 1.0 "358758 0.2 53.5 1.0 "358759 0.3 53.5 1.0 Fits 358752 358751 HOLCX 358740 HOLEX - j 358740 358745 358752 m 358757 _D. J t jkiamirt' GRAVfix - Super quick NC needle marker for automatic tool changing S ’.ijH Version Advantage With Weldon shank D 20 mm (to DIN 18358). Embossing process (virtually no notching effect) suitable even for thin-walled parts. High potential for savings when marking parts, since no additional operation is required. Long working life. Application Size AERO - Powered by 4 bar compressed air - with continuous air supply to the machine spindle by M-function - without continuous air supply via adaptor supplied. Size HYDRO- Powered by the inner coolant flow in the machine spindle, from approx. >15 bar. Use cooling lubricant from a system that provides approx. 0.080 mm degree of filtration Operation with work spindle stationary. Supplied with 4 engraving needles with brazed-on carbide tips size 70,90,100,110. Plastic Type AERO HYDRO 35 8760 I ifbGnnt' 1 GRAVfix NC needle marker I Version Application With brazed-on carbide tip 80 HRC. The harder the material, the flatter the tip angle. Tip angle degrees 70 90 100 110 358765 1 J&Gannt” Engraving needle (1 piece) Applicable for Plastic / soft materials Aluminium Steel S500 N/mm2 Stainless steel/ heat treatable steels 2-D codes (encoded data) 726 Main catalogue Hoffmann Group 46