1356 Каталог HOFFMANN GROUP 2015 Инструмент режущий слесарный измерительный Стр.1356

Каталог HOFFMANN GROUP 2015 Tools Инструменты Ver 46 Стр. 1356 1356 ENG Lab2u

VBW Steel grid and plate cutter STAHLWILLEg ) Ribbed chisel for metal and stone Version Material Advantage Strong double T-profile shank, uniformly through hardened over entire length. Can be repeatedly reground without re-hardening. Tough special chisel steel, chrome-plated surface. The chisel will not jam when working in concrete, since the loose concrete spoil flows along the grooves in the chisel. Overall length mm 150 200 250 300 r 74 0100 Ribbed flat chisel Blade width mm 20 26 30 35 Overall length For steel flats up to (73 8000) 40X4 fa 73 8000 Steel grid and plate cutter r 73 8010 Spare jaws complete with screws Version Compound action cutter head, drop forged middle section, centre stop with extra-large shock-absorbing zone; painted tubular handles with multi-component grips. Material Jaws of drop forged high-alloy steel, annealed and the blades induction hardened. Application Cutting flat bars in steel grid from 30x30 mm mesh pitch. s.- is Minimum spacing 30 mm Arennsteig Flat and cross-cut chisel for metal Standard Similar to DIN 6451/53. Version Made of flat-oval steel, hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering. 740900- Special quality, i.e. highest possible tip hardness (approx. 59 HRC) with exceptional toughness. Material 740500/0600- Chrome vanadium air hardening steel, painted surface. 740900- Chrome vanadium special alloy, surface red, powder-coated. Overall length mm 100 125 150 175 200 250 300 r 74 0500 ARtNNsrcio Flat chisel r 74 0900 IE SWISS TOOLS Flat chisel r 74 0600 Arennsteig Cross-cut chisel Blade width (74 0500) mm 15 15 18 21 24 25 26 Blade width (74 0900) mm - 18 22 25 28 28 28 Blade width (74 0600) mm - 5 6 7 8 9 9 0 0 03 5WIS TOOLS 740600 8 0 m Cold chisel for metal Material Fully hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering. Special quality, i.e. highest possible tip hardness (approx. 59 HRC) with exceptional toughness. Chrome vanadium special alloy. Chrome-plated surface. Overall length mm 120 130 150 165 180 r 741000 Cold flat chisel special quality r741100 Cold cross-cut chisel special quality Blade width (74 1000) mm 10 12 14 18 22 Blade width (741100) mm 4 5 6 7 - nui.' t-'u - 741000 741100 Arennsteig Splitting chisel for metal and stone Material With flat blade. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering. Chrome vanadium air hardening steel, painted surface. For stone working Overall length mm 250 240 1 741200 r 74 1200 Splitting chisel for stone r 74 1400 Splitting chisel for metal For metai working Blade width (74 1200) mm 50 - 1 Blade width (741400) mm - 26 741400 1356 Main catalogue Hoffmann Group 46