376 Каталог KYOCERA 2017 Инструмент сборный и монолитный для станков Стр.G15

Каталог KYOCERA 2017 Инструмент режущий Стр. G15 0376 Lab2u

Recommended Cutting Conditions Рекомендованные режимы резания на станках G : 1st Recommendation : 2nd Recommendation Recommended Cutting Conditions Рекомендованные режимы резания на станках (GBF-GL) Workpiece Material Обрабатываемый материал Recommended Insert Grades Cutting Speed Vc (m/min) Скорость резания (м/мин) (1) f for Grooving (mm/rev) MEGACOAT MEGACOAT NANO (2) f for Turning (mm/rev) Remarks Примечания PR1215 PR1535 (3) ap for Turning (mm) GBF32R075 - 005GL GBF32R095 - 100-005GL GBF32R150 - 200-010GL GBF32R300 - 010GL 80 180 70 160 (1) 0.02 0.07 (1) 0.03 0.08 (1) 0.03 0.08 (1) 0.04 0.1 Carbon Steel (2) Not recom. (2) 0.03 0.06 (2) 0.03 0.06 (2) 0.04 0.08 (3) Not recom. (3) MAX. 0.2 (3) MAX. 0.3 (3) MAX. 0.5 80 180 70 160 (1) 0.02 0.06 (1) 0.03 0.07 (1) 0.03 0.07 (1) 0.04 0.09 Alloy Steel (2) Not recom. (2) 0.03 0.06 (2) 0.03 0.06 (2) 0.04 0.08 Coolant (3) Not recom. (3) MAX. 0.2 (3) MAX. 0.3 (3) MAX. 0.5 60 130 50 120 (1) 0.02 0.06 (1) 0.03 0.07 (1) 0.03 0.07 (1) 0.04 0.09 Stainless Steel (2) Not recom. (2) 0.03 0.06 (2) 0.03 0.06 (2) 0.04 0.08 (3) Not recom. (3) MAX. 0.2 (3) MAX. 0.3 (3) MAX. 0.5 : 1st Recommendation : 2nd Recommendation Precautions Compatibility with GBF and GBA 1 GBF will fit KGBA / KGBAS toolholders Caution: The maximum groove depth for KGBA / KGBAS toolholders is 2.5 mm Q GBA inserts will also fit KGBF-F toolholders Caution: The rake angle after installation in the toolholder is 11° KGBF-F toolholder with GBF Insert Maximum Machining Diameter 3 mm groove depth is available on workpiece diameters up to 51mm 2.7 mm groove depth is available on workpiece diameters up to 100mm, 2.5 mm groove depth is available on workpiece diameters up to 200mm The workpiece will interfere with the holder at maximum cutting diameters or larger. Recommended Cutting Conditions Рекомендованные режимы резания на станках (GBF) Workpiece Material Обрабатываемый материал Recommended Insert Grades Cutting Speed Vc (m/min) Скорость резания (м/мин) (1) f for Grooving (mm/rev) MEGACOAT MEGACOAT NANO Carbide (2) f for Turning (mm/rev) Remarks Примечания PR1215 PR1535 GW15 (3) ap for Turning (mm) GBF32&025 - 053 GBF32&065 - 095 GBF32&100 - 145 GBF32&150 - 300 80 180 70 160 (1) 0.01 0.05 (1) 0.02 0.07 (1) 0.03 0.08 (1) 0.03 0.08 Carbon Steel (2) Not recom. (2) Not recom. (2) 0.03 0.06 (2) 0.03 0.06 (3) Not recom. (3) Not recom. (3) MAX. 0.2 (3) MAX. 0.2 80 180 70 160 (1) 0.01 0.04 (1) 0.02 0.06 (1) 0.03 0.07 (1) 0.03 0.07 Alloy Steel (2) Not recom. (2) Not recom. (2) 0.02 0.05 (2) 0.02 0.05 (3) Not recom. (3) Not recom. (3) MAX. 0.2 (3) MAX. 0.2 60 130 50 120 (1) 0.01 0.04 (1) 0.02 0.06 (1) 0.03 0.07 (1) 0.03 0.07 Stainless Steel (2) Not recom. (2) Not recom. (2) 0.02 0.05 (2) 0.02 0.05 (3) Not recom. (3) Not recom. (3) MAX. 0.2 (3) MAX. 0.2 Coolant 60 100 (1) 0.01 0.05 (1) 0.02 0.07 (1) 0.03 0.08 (1) 0.03 0.08 Cast Iron (2) Not recom. (2) Not recom. (2) 0.03 0.06 (2) 0.03 0.06 (3) Not recom. (3) Not recom. (3) MAX. 0.2 (3) MAX. 0.2 150 400 (1) 0.01 0.05 (1) 0.02 0.07 (1) 0.03 0.08 (1) 0.03 0.08 Aluminum Alloys (2) Not recom. (2) Not recom. (2) 0.03 0.06 (2) 0.03 0.06 (3) Not recom. (3) Not recom. (3) MAX. 0.2 (3) MAX. 0.2 150 300 (1) 0.01 0.04 (1) 0.02 0.06 (1) 0.03 0.07 (1) 0.03 0.07 Brass (2) Not recom. (2) Not recom. (2) 0.02 0.05 (2) 0.02 0.05 (3) Not recom. (3) Not recom. (3) MAX. 0.2 (3) MAX. 0.2 G15 Grooving