53 Каталог KORLOY 2016 Металлорежущий инструмент и станочная оснастка ENG Стр.A42

Каталог KORLOY 2016 Инструмент и оснастка Стр. A42 0053 ENG Lab2u

Chip breakers KORLOY Chip Breaker For Milling Geometry s ImmI mv Cutting edge Application range feed rate fn(mm/rev) 0.063 0.10 0.16 0.25 0.4 0.63 1.0 1.6 2.5 4.0 6.3 depth of cut ap(mm) 0.16 0.25 0.4 0.63 1.0 1.6 2.5 4.0 6.3 10.0 11.6 13 0.5 8.0 0.05 0.30 0.05 0.40 0.05 0.35 0.10 0.45 0.5 5.5 0.3 2.0 0.05 0.15 0.5 16 0.05 0.15 0.5 16 0.5 5.0 0.05 0.30 Features For Medium to Roughing of Milling Suitable geometry design for general milling has wider ranges of machining For Aluminum Sharp cutting edge design ensures low cutting resistance and excellent machining in difficult- tocut materials, aluminum and light machining For Finishing of Milling Low cutting force chip breaker design ensures longer tool life and excellent machining in difficult-to-cut material and light machining For machining Hard-to-cut materials Low cutting resistance for excellent tool life and surface roughness in machining hard-to-cut materials For Medium to Roughing of Milling Suitable geometry design for general milling has wider ranges of machining For Finishing of Milling (Wiper) Wiper insert provides improved surface roughness due t( special cutting edge For Aluminum Sharp cutting edge and lubricated top face show excellent chip flow and welding resistance in aluminum machining For Finishing of Milling Low cutting force chip breaker design ensures longer tool life and excellent machining in difficult-to-cut material and light machining For Medium to Roughing of Milling Suitable geometry design for general milling has wider ranges of machining For hard-to-cut material machining The chip breaker with low cutting resistance ensures superior machinability in hard-to-cut materials For Finishing of Milling Special design for light cutting of gummy materials like stainless steel and hard to machine material provide fine surface finish and longer tool life For Medium cutting of Milling Chip breaker design to cover general cutting condition provides wide available application range Ground type and as sintered type is available 42 Notice Application ranges are based on main cutting material Grades & Chip Breakers 0.04 MA MF W MA MF ML MF