262 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.258

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 258 0262 ENG Lab2u

GROOVE-TURN CUTGniP GIP-RX/LX Precision Double-Ended Inserts for External Grooving Next to a Shoulder Dimensions Tough Hard Recommended Machining Data Designation W±002 R R±toler T max-r M F1 IC830 IC808 f groove (mm/rev) GIP 0.80-0.00R/LX 0.80 0.00 0.030 1.60 2.40 1.6 0.02-0.04 GIP 1.00-0.00R/LX 1.00 0.00 0.030 2.00 2.40 1.6 0.02-0.05 GIP 1.19-0.1RX 1.19 0.10 0.030 2.00 2.40 1.6 0.03-0.05 GIP 1.57-0.15 R/LX 1.57 0.15 0.030 2.70 2.40 1.7 0.04-0.06 GIP 1.57-0.79RX 1.57 0.79 0.030 2.80 2.40 1.7 0.04-0.08 GIP 2.00-0.15 R/LX 2.00 0.15 0.030 3.00 2.40 1.7 0.05-0.08 GIP 2.39-0.15 RX 2.39 0.15 0.030 3.50 2.40 1.7 0.05-0.09 GIP 2.39-1.19RX 2.39 1.19 0.050 3.90 2.40 1.7 0.06-0.12 Toolholder seat needs to be modified according to insert profile to ensure clearance. For cutting speed recommendations and user guide, see pages 340-351 For tools, see pages: GHMPR/L (232) GHMR/L (232) CUTGniP GHMUR/L External Holders for 45° Undercutting Designation GHMUR/L 16 GHMUR/L 20 GHMUR/L 25 h b li l2 f 4.80 6.40 6.40 16.0 20.0 25.0 16.0 20.0 25.0 112.00 122.00 137.00 25.0 25.0 25.0 19.0 23.0 28.0 SR M6X16 DIN912 SR M6X16 DIN912 SR M6X16 DIN912 For D>100 mm, GIP/GIF inserts can be used (clearance types UN, D or G are not required). For inserts, see pages: GIMY-UN (258) GIP-UN (259) HW 5.0 HW 5.0 HW 5.0 CUTGniP GIMY-UN Utility Single-Ended Inserts for External Undercutting 5o - -15 Ref y -4 Dimensions Recommended Machining Data Designation W±005 R±005 M Tmax-r IC8250 f groove (mm/rev) GIMY 315-UN 3.00 1.50 2.40 2.00 0.05-0.15 GIMY 420-UN 4.00 2.00 3.20 2.50 0.05-0.15 For 45° undercutting on D 100 mm, regular GIMY inserts may be used. For cutting speed recommendations and user guide, see pages 340-351 For tools, see pages: GHMUR/L (258) 258 ISCAR