263 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.259

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 259 0263 ENG Lab2u

259 CUTGniP GIP-UN Precision Double-Ended Inserts for External Undercutting Dimensions Tough Hard Recommended Machining Data Designation W±0.05 R±005 D min M T max-r IC830 IC8250 IC808 IC20 f groove (mm/rev) GIP 3.00-1.50UN 3.00 1.50 35.00 2.40 4.00 0.05-0.15 GIP 4.00-2.0UN 4.00 2.00 35.00 3.20 4.00 0.05-0.15 Not recommended for turning. For undercutting at 45° and D100 mm, other GIP inserts apply as well. For cutting speed recommendations and user guide, see pages 340-351 For tools, see pages: C -GHDR/L (233) CGHN-DG (239) CGPAD (238) CGPAD-JHP (238) GHDR/L (short pocket) (233) GHDR/L-JHP (short pocket) (234) GHMPR/L (232) GHMR/L (232) GHMUR/L (258) CUTGniP GPV Precision Inserts for Grooving Multi V-Ribbed Pulleys Dimensions Tough Hard Recommended Machining Data Designation W P±0.03 Tmax-r R±005 R1±°.°5 Z l IC8250 IC5010 IC428 f groove (mm/rev) GPV 3-2.34-1 (1) 2.80 2.34 2.21 0.32 0.20 1 15.30 0.06-0.15 GPV 4-3.56-1 (1) 4.03 3.56 3.42 0.45 0.30 1 15.30 0.06-0.15 GPV 8-2.34-3 (2) 7.48 2.34 2.21 0.32 0.20 3 15.30 0.06-0.15 GPV 14-2.34-4 (3) 9.82 2.34 2.21 0.32 0.20 4 24.00 0.06-0.15 GPV 14-3.56-3 (3) 11.14 3.56 3.42 0.45 0.30 3 24.00 0.06-0.15 GPV 17-3.56-4 (4) 14.68 3.56 3.42 0.45 0.30 4 24.00 0.06-0.15 Toolholder seat needs to be modified according to insert profile to ensure clearance. For cutting speed recommendations and user guide, see pages 340-351 Use holders which are suitable for GIP 3 / GIP 4 (2) Use holders which are suitable for GIMY 808 (3) Use holders which are suitable for TIGER 14 Use holders which are suitable for TIGER 17 For tools, see pages: C -GHDR/L (233) CGPAD-JHP (238) GHDR/L (short pocket) (233) GHDR/L-JHP (short pocket) (234) GHDR/L/N 12/14 (284) GHMPR/L (232) GHMR/L (232) CUTGniP GDK Inserts for Rough Grooving V-Shaped Piston Grooves Designation GDK 1.5-MS GDK 1.81-MS Dimensions Recommended Machining Data W±0.02 R Tmax- r alpha l M IC808 f groove (mm/rev) 1.50 0.50 8.40 14.0 21.00 3.50 0.15-0.25 1.81 0.50 8.40 12.0 19.70 3.50 0.15-0.25 For steel grooves GROOVE-TURN