260 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.256

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 256 0260 ENG Lab2u

GROOVE-TURN CUTGniP GIPA (W=3-6) Double-Ended Precision Ground Inserts with a Polished Top Rake for Machining Aluminum ±0.025 Q= n m m GIPA...D-ID5 Dimensions Tough Hard Recommended Machining Data Designation W±0.02 R±0.03 M IC20 ID5 ap (mm) f turn (mm/rev) f groove (mm/rev) GIPA 3.00-0.20 3.00 0.20 2.40 0.25-1.80 0.12-0.20 0.08-0.14 GIPA 3.00-0.20-D <1> 3.00 0.20 2.40 0.25-1.80 0.12-0.25 0.09-0.16 GIPA 4.00-0.40 4.00 0.40 3.20 0.50-2.40 0.14-0.31 0.10-0.20 GIPA 5.00-0.40 5.00 0.40 4.00 0.50-3.00 0.16-0.34 0.11-0.23 GIPA 6.00-0.40 6.00 0.40 4.80 0.50-3.60 0.19-0.41 0.11-0.26 Dmin for internal machining = 70 mm For cutting speed recommendations and user guide, see pages 340-351 (1) Single-ended PCD tipped insert For tools, see pages: C -GHDR/L (233) CGHN 26-M (302) CGHN 32-DGM (304) CGHN 32-M (303) CGHN-D (239) CGHN-DG (239) CGHN-S (239) CGPAD (238) CGPAD-JHP (238) GHDR/L (short pocket) (233) GHDR/L-JHP (short pocket) (234) GHGR/L (235) GHMPR/L (232) GHMR/L (232) GHSR/L (312) GHSR/L-JHP-SL (313) 5 CUTGniP GDMA Utility Double-Ended Insert with a Polished Top Rake for Machining Aluminum 30 Ref. ± T )k= j. 3 Can cut arcs to 250° Dimensions Tough Hard Recommended Machining Data Designation W±0.05 R±°.°5 M 7 0 IC IC507 ap (mm) f turn (mm/rev) f groove (mm/rev) GDMA 840 8.00 4.00 5.60 1 0.00-4.00 0.24-0.67 0.14-0.38 For heavy-duty machining Dmin for internal machining = 65 mm For cutting speed recommendations and user guide, see pages 340-351 For tools, see pages: GADR/L-8 (243) GADR/L-JHP (243) GAFG-R/L-8 (451) GHDKR/L (358) GHIFR/L-A (357) GHIR/L (W=7.0-8.3) (301) GHIUR/L-C-A (15° 27.5°) Bars (357) GHIUR/L-UC (357) W 256 ISCAR