258 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.254

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 254 0258 ENG Lab2u

GROOVE-TURN CUTGniP GIF (full radius) Precision Double-Ended Full Radius Inserts for Grooving Dimensions Tough Hard Recommended Machining Data Designation W±002 R±005 M Tmax-r IC8250 IC808 0 2 IC f groove (mm/rev) GIF 4.78-2.39 4.78 2.39 4.00 11.40 0.11-0.20 GIF 6.35-3.18 6.35 3.18 4.80 10.60 0.14-0.27 Dmin for internal machining = 70 mm For cutting speed recommendations and user guide, see pages 340-351 For tools, see pages: C -GHDR/L (233) CGHN 26-M (302) CGHN 32-DGM (304) CGHN 32-M (303) CGHN-D (239) CGHN-DG (239) CGHN-S (239) CGPAD (238) CGPAD-JHP (238) GHDR/L (short pocket) (233) GHDR/L-JHP (short pocket) (234) GHGR/L (235) GHMPR/L (232) GHMR/L (232) CUTGniP GIA-K (W=3-6) Flat Top Precision Double-Ended Inserts with T-Land for Machining Cast Iron 15° V 7° w - 3 Ref.V " m p. Dimensions Tough Hard Recommended Machining Data Designation W±0.02 R R±toler M T max-r IC5010 IC428 ap (mm) f turn (mm/rev) f groove (mm/rev) GIA 3.00K-0.40 3.00 0.40 0.030 2.40 13.00 0.50-1.80 0.12-0.20 0.07-0.13 GIA 4.00K-0.40 4.00 0.40 0.030 3.20 13.00 0.50-2.40 0.16-0.27 0.09-0.18 GIA 4.00K-0.80 4.00 0.80 0.050 3.20 13.00 1.00-2.40 0.18-0.32 0.09-0.19 GIA 5.00K-0.80 5.00 0.80 0.050 4.00 13.00 1.00-3.00 0.23-0.40 0.11-0.24 GIA 6.00K-0.80 6.00 0.80 0.050 4.80 13.00 1.00-3.60 0.27-0.48 0.14-0.29 Dmin for internal machining = 70 mm For cutting speed recommendations and user guide, see pages 340-351 For tools, see pages: C -GHDR/L (233) CGHN 26-M (302) CGHN 32-DGM (304) CGHN 32-M (303) CGHN-D (239) CGHN-DG (239) CGHN-S (239) CGPAD-JHP (238) GHDR/L (short pocket) (233) GHDR/L-JHP (short pocket) (234) GHGR/L (235) GHMPR/L (232) GHMR/L (232) CUTGniP GIA-K (long pocket) Flat Top Precision Double-Ended Inserts with T-Land for Machining Cast Iron ±0.0250= 15' Ref.- M tf J Dimensions Tough Hard Recommended Machining Data Designation W±0.02 R±0.05 M Tmax-r D1 min IC5010 IC428 ap (mm) f turn (mm/rev) f groove (mm/rev) GIA 8.00K-0.80 8.00 0.80 6.00 25.00 160.0 1.00-4.80 0.36-0.64 0.18-0.38 GIA 8.00K-1.20 8.00 1.20 6.00 25.00 160.0 1.45-4.80 0.36-0.70 0.18-0.38 Dmin for internal machining = 65 mm For cutting speed recommendations and user guide, see pages 340-351 For tools, see pages: C -GHDR/L (233) CGHN-8-10D (244) GADR/L-8 (243) GADR/L-JHP (243) GAFG-R/L-8 (451) GHDR/L (long pocket) (240) GHDR/L-JHP (long pocket) (241) GHFG-R/L-8 (450) GHFGR/L-8 (450) GHIR/L (W=7.0-8.3) (301) 254 ISCAR