259 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.255

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 255 0259 ENG Lab2u

CUTGniP GITM CBN Tipped Inserts for Turning and Grooving on Hard Ferrous Materials Dimensions Tough Hard Recommended Machining Data Designation W±0.02 R±005 R M IB20H IB50 IB10H ap (mm) f turn (mm/rev) f groove (mm/rev) GITM 3.00K-0.20 3.00 0.20 0.20 2.40 0.00-0.30 0.02-0.07 0.02-0.05 GITM 4.00K-0.20 4.00 0.20 0.20 3.20 0.00-0.40 0.03-0.09 0.02-0.07 GITM 5.00K-0.40 5.00 0.40 0.40 4.00 0.00-0.50 0.05-0.13 0.03-0.10 GITM 6.00K-0.40 6.00 0.40 0.40 4.80 0.00-0.60 0.05-0.15 0.04-0.12 GITM 8.00K-0.40 8.00 0.40 0.40 6.00 0.00-0.80 0.07-0.20 0.05-0.16 Dmin for internal machining = 70 mm For cutting speed recommendations and user guide, see pages 340-351 For tools, see pages: C -GHDR/L (233) CGHN 26-M (302) CGHN 32-DGM (304) CGHN 32-M (303) CGHN-D (239) CGHN-DG (239) CGHN-S (239) CGPAD (238) CGPAD-JHP (238) GHDR/L (short pocket) (233) GHDR/L-JHP (short pocket) (234) GHGR/L (235) GHMPR/L (232) GHMR/L (232) GHSR/L (312) GHSR/L-JHP-SL (313) CUTGRiP GITM (full radius) Full Radius CBN Tipped Inserts for Grooving and Turning on Hard Ferrous Materials m = 2£ -r HARD MATERIALS IB20H IB50/IB10H Dimensions Tough Hard Recommended Machining Data Designation W±0.02 R±005 M D1 min IB20H IB50 IB10H ap (mm) f turn (mm/rev) f groove (mm/rev) GITM 3.00K-1.50 3.00 1.50 2.40 160.0 0.00-0.30 0.03-0.10 0.02-0.06 GITM 4.00K-2.00 4.00 2.00 3.20 160.0 0.00-0.40 0.04-0.14 0.02-0.09 GITM 5.00K-2.50 5.00 2.50 3.90 160.0 0.00-0.50 0.05-0.18 0.03-0.11 GITM 6.00K-3.00 6.00 3.00 5.00 160.0 0.00-0.60 0.06-0.22 0.04-0.13 GITM 8.00K-4.00 8.00 4.00 5.60 160.0 0.00-0.80 0.08-0.29 0.05-0.17 Dmin for internal machining = 70 mm For cutting speed recommendations and user guide, see pages 340-351 For tools, see pages: C -GHDR/L (233) CGHN 26-M (302) CGHN 32-DGM (304) CGHN 32-M (303) CGHN-D (239) CGHN-DG (239) CGHN-S (239) CGPAD (238) CGPAD-JHP (238) GHDR/L (short pocket) (233) GHDR/L-JHP (short pocket) (234) GHGR/L (235) GHMPR/L (232) GHMR/L (232) GHSR/L (312) GHSR/L-JHP-SL (313) CUT-GRSP GIPY Single-Ended Full Radius Sharp Edged Precision Inserts for Profiling of High Temperature Alloys Dimensions Tough Hard Recommended Machining Data Designation W±0.02 R±005 M IC20 IC07 IC806 IC907 IC IC804 f turn (mm/rev) f groove (mm/rev) GIPY 3.00-1.50 3.00 1.50 2.40 0.19-0.28 0.08-0.15 GIPY 4.00-2.00 4.00 2.00 3.20 0.22-0.37 0.10-0.20 GIPY 5.00-2.50 5.00 2.50 3.90 0.24-0.46 0.13-0.23 GIPY 6.00-3.00 6.00 3.00 5.00 0.26-0.55 0.15-0.27 GIPY 8.00-4.00 8.00 4.00 5.60 0.34-0.74 0.20-0.36 Can cut arcs to 250° Dmin for internal machining = 70 mm For cutting speed recommendations and user guide, see pages 340-351 For tools, see pages: C -GHDR/L (233) CGFG 51-P8 (452) CGHN 26-M (302) CGHN 32-DGM (304) CGHN 32-M (303) CGHN-D (239) CGHN-DG (239) CGHN-P8 (240) CGHN-S (239) CGHR/L-P8DG (240) CGPAD (238) CGPAD-JHP (238) GHDR/L (short pocket) (233) GHDR/L-JHP (short pocket) (234) GHGR/L (235) GHMPR/L (232) GHMR/L (232) GHSR/L (312) GHSR/L-JHP-SL (313) 255 GROOVE-TURN