265 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.261

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 261 0265 ENG Lab2u

261 ISCARTHnEAD CUTGniP TIP-WT Precision Ground 55° Partial Profile, Double-Ended Threading I nserts with a Chipformer I TIP inserts are 1.6 mm longer than GIP in the same pocket Dimensions Tough Hard Designation W R±0.03 TPI max TPI mini1) 8 0 IC IC908 TIP 2WT-0.05 2.40 0.05 54 D/6.4 TIP 4WT-0.15 4.00 0.15 19 D/6.4 TIP 5WT-0.25 5.50 0.25 12 D/6.4 Toolholder seat needs to be modified according to insert profile to ensure clearance Pitch max 0.187xD (1) D-Diameter of thread (inch) For tools, see pages: C -GHDR/L (233) CGHN 26-M (302) CGHN 32-DGM (304) CGHN 32-M (303) CGHN-D (239) CGHN-DG (239) CGHN-S (239) CGPAD (238) CGPAD-JHP (238) GHDR/L (short pocket) (233) GHDR/L-JHP (short pocket) (234) GHGR/L (235) GHMPR/L (232) GHMR/L (232) GHSR/L (312) GHSR/L-JHP-SL (313) ISCARTHi CUTGniP TIP-MT Precision Ground 60° Partial Profile Double-Ended Threading Inserts with Chipformers ±0.025 0 17 TIP _MT Dimensions Tough Hard Designation W R±0.03 Pmin TPI max 8 0 IC 0 9 IC TIP 2A-MT-0.05 (1) 2.40 0.05 0.45 56 TIP 2MT-0.05 2.40 0.05 0.45 56 TIP 2MT-0.14 2.40 0.14 1.11 23 TIP 4A-MT-0.15 (1) 4.00 0.15 1.25 20 TIP 4MT-0.15 4.00 0.15 1.25 20 TIP 4MT-0.20 4.00 0.20 1.63 16 TIP 5MT-0.25 5.50 0.25 1.94 13 (a) TIP inserts are 1.6 mm longer than GIP in the same pocket Toolholder seat needs to be modified according to insert profile to ensure clearance (1) Without chipformer (flat rake) For tools, see pages: C -GHDR/L (233) CGHN 26-M (302) CGHN 32-DGM (304) CGHN 32-M (303) CGHN-D (239) CGHN-DG (239) CGHN-S (239) CGPAD (238) CGPAD-JHP (238) GHDR/L (short pocket) (233) GHDR/L-JHP (short pocket) (234) GHGR/L (235) GHMPR/L (232) GHMR/L (232) GHSR/L (312) GHSR/L-JHP-SL (313) GROOVE-TURN