755 Каталог HOFFMANN GROUP 2015 Инструмент режущий слесарный измерительный Стр.755

Каталог HOFFMANN GROUP 2015 Tools Инструменты Ver 46 Стр. 755 0755 ENG Lab2u

T-Rex extension bases for increasing the NC vice height Suitable for Size 125 - T-Rex No. 361202 / Centro Gripp No. 361180. Size 125XL- No. 360400/0460/0500/0510. Supplied with Size 125- Extension base with 1 locating pin, 2 T-nuts, and 4 bolts. Size 125XL Extension base with 1 locating pin, 2 tenons, 8 duo table clamps, and 4 bolts. Tf e-f f II L 1.r M X y J25XL For type 3 361230 Extension base B L c -0.02 e f n H7 k H7 u X y Suitable for colour code mm 125 154 250 85 100 96 20 30 13 125.5 200 1 125XL 126 400 100 20 JlJf1 /7' Screw-in gripper inserts Gripper inserts Suitable for Application 36 1242- NC high pressure vice No. 361180,361202,361302. Gripper insert with spikes, e.g. for clamping blanks. Smooth clamping insert with coating, e.g. for clamping premachined components. Round gripper insert with spikes for drilling close to edges and for additional clearance under the workpiece. For highly tempered materials and flame-cut blanks. Suitable for colour code 30 Gripper insert with spikes S 30 I ZSO hejght 3_ 45 mm 10 1 lin Gripper insert with 2 spikes a 50 i zhu height 45 6 mm II m 1JA1 Gripper insert with 4 spikes a so i zh i height 45 6 mm nn 5 m 17AJ Gripper insert carbide a 30 i zhz height 42 57 mm ii Id 1945 Clamping insert with S 30 Zl13 coating, smooth nn 3 361250 rinsert ii Dimension SI - S5 mm 361210/1222 Universal set Grip Suitablefor Duo Plus No. 36 0605, Centro Gripp No. 361180, T-Rex No. 361202 and Titan 2 No. 361302. Application The Universal set Grip offers a variety of possibilities for the clamping of blanks. It consists of a base unit with position adaptation, a mounting unit, and a gripper insert, and is bolted to the carrier jaw with an M10 bolt. The customer can modify the mounting unit to set the points of the gripper unit in nearly any position relative to the workpiece, allowing the gripper height and also the mounting height of the workpiece to be varied. For type 125 Suitable for colour code 5 11 Universal set Grip S 30 3 13 (case with 4 units) 1 Eye gripper insert Suitablefor Universal set Grip No. 361345, Duo Plus, T-Rex 125, Titan 2 and Centro Gripp. Application Replaces Grip in the Universal set. The special form of the eye gripper reduces the deformation of the workpiece arising from the transfer of the clamping forces. This is particularly advantageous for clamping components on which fits are to be machined. For type 125 Suitable for colour code 3 36 1350 Eye gripper II S2 361238 361240 S3 1 Gripper insert ig/.Jjl J smooth/spikes 361241 361242 S5 361245 361250 hjJ Gripper insert +LJtffJ 'I'M1 J round 65 mm capacity min. 361345 40 mm l y\ 18 mm I \ y hB J 29 mm Seating face milled I away min. 0 20 mm max. 0 - 120 mm Colour code TC Titan 2 TC-GARANT Centro Gripp LC Duo Plus LC-GARANT I T-Rex I Titan Main catalogue Hoffmann Group 46 755