1053 Каталог WIDIA 2011 Инструментальная оснастка для металлорежущих станков Стр.K17

Каталог WIDIA 2011 Инструментальная оснастка Стр. K17 1053 ENG Lab2u

WIDIA Technical Information KM Tooling Assembly/Disassembly Instructions Disassembly Procedure (continued) 6. Clean locking balls, torque screw, lockrod, and bump-off pin of all grease and inspect for wear, burrs, or obvious damage. If rebuilding the unit with a repair parts package, we recommend using all new components contained in the kit. If you are not using the repair package, but are retiming or adjusting the unit, inspect the external threads on the torque screw and lockrod, the locking ball contact surfaces on the lockrod, and the mating surfaces between the lockrod and bump-off pin. Discard any components of questionable condition and replace with new ones. Note the condition of the raised taper key on the lockrod as you will need this later. 7. Inspect inside the KM taper for damage and/or contamination. Clean the taper and canister with solvent. Allow the unit to dry before reassembling. Inspect the torque screw threads in the body for damage. 8. If the unit is equipped for through-coolant capability, you may want to verify that the coolant passages are clear. Clean if required. (continued) WIDIA K17 Technical Information