1052 Каталог WIDIA 2011 Инструментальная оснастка для металлорежущих станков Стр.K16

Каталог WIDIA 2011 Инструментальная оснастка Стр. K16 1052 ENG Lab2u

Technical Information Technical Information KM Tooling WIDIA Assembly/Disassembly Instructions Disassembly Procedure (continued) 1. Remove the two socket-head cap screws that retain the bump-off pin (see Frame 1). 2. Grip the exposed end of the bump-off pin with pliers and pull straight out. Some resistance may be felt due to the O-ring seal around the bump-off pin (see Frame 2). 3. Using the appropriate metric wrench, remove the torque screw. The lockrod should come out with the torque screw. Separate the torque screw from the lockrod, remembering the lockrod has left-hand threads (see Frame 3). 4. Remove the locking balls from within the canister. Grease can cause them to stick inside. Pushing the balls one at a time towards the center of the canister then turning the clamping unit upside down and tapping it against your palm will usually dislodge them. If you must hit the clamping unit harder, be certain you do not damage the gage or locking face of the unit. A small magnetic screwdriver also works well (see Frame 4). 5. Normally, no further disassembly should be attempted. If the clamping unit body or canister has been damaged, it should be replaced with a new unit. You can also contact your WIDIA Sales office for instructions on how to send the unit to a WIDIA Repair facility. (continued) K16 WIDIA