868 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.868

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 868 0868 ENG Lab2u

Hoffmann Group 47 High pressure machine vices Base body and movable upper sliding blocks made of spheroidal graphite iron GGG 60, slides hardened and ground. Mechanical power intensifier with precise clamping force pre-selection. Maintenance-free and fully enclosed high pressure spindle. As standard with hardened and ground smooth clamping jaws. Base plate with longitudinal and cross tenons provides for quick and precise alignment of the vice in longitudinal and transverse directions. Application: For vibration-free, absolutely reliable clamping at maximum cutting and feed rate forces. Tight manufacturing tolerances enable a number of vices to be fitted in line with each other. Supplied with: 4 table clamps, 1 pair hardened jaws, crank handle. Optional extras: For tenon and Tee-nut set see No. 360530; for accessories see No 362015 - 362025. For further jaws see No. 362400 - 362620. Ground end piece, compensates tilting at high clamping forces. For exchangeable jaws see No. 362400 - 362620. Maintenance-free high pressure spindle with integral mechanical power intensifier. Integral friction dutdi prevents damage to the drive. Jaw width s 362010 Clam- ping range bl Clam- ping range bll Clam- ping range extended Clam- ping force Wei- ght c d, a L, L3 L, G +0.02 Colour code for suitable accessories nou/. mm High-pressure vice mm kN kg mm 125 1988.91 0-105 100-205 255 40 25 107 M12 425 80 60 489 - 694 65 160 2608.65 0-155 150-305 365 50 50 130 M16 570 90 95 575 - 880 80 Swivel bases Swivel base with longitudinal tenon slot for fast and exact alignment of the vice. 360 graduations (4x90°) clearly marked on the swivel plate scale. Clamping slots for easy fitting to the machine table. for jaw width a 362015 L L, Height b b. Weight suitable for colour code mm Swivel base mm kg 125 558.36 264 16 28 270 240 10.8 160 700.92 325 16 32 325 295 18.4 Accessories for jaw width mm 125 S 160 a 362020 Adjustable component backstop 107.42 170.28 suitable for colour code for jaw width mm 125 S 160 a 362030 dampingjaw with stepped upper edge 90.88 134.15 suitable for colour code for jaw width mm 125 S 160 a 362035 dampingjaw with longitudinal grooves 114.84 139.59 suitable for colour code tec Load cell Hydraulic load cells with directly attached pressure gauge for clamping force measurement from 0 - 320 kN. See main catalogue part 47. Colour code: High press. Holex 868