869 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.869

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 869 0869 ENG Lab2u

Hoffmann Group 47 holoC. High pressure machine vices Base body as well as fixed and movable clamping pieces of high-quality spheroidal graphite cast iron (GGG60). All wearing parts such as the jaw guides hardened and ground. Mechanical-hydraulic clamping system with power intensifier with clamping force pre-setting. Constant clamping force for each clamping operation, high repeat accuracy. Base plate with longitudinal slot allowing quick alignment of the vice. Enclosed spindle. Application: For vibration-free, reliable clamping under high cutting and feed rate forces. Quick clamping by hand crank. Supplied with: 1 pair grooved jaws (rear face smooth), hand crank. Optional extras: For replacement jaws see No. 362076 / 2077 / 2079, swivel base on request. Quick adjustment of the damping range. Exchangeable jaws. Exchangeable jaws. Pre-setting of the damping pressure. Jaw width 362075 h-pressure vice Clamping Clamping Clamping Clamping Weight range bl range bll range bill force G ±0.02 Colour code for suitable accessories mm without swivel base mm kN kg mm 113 1287.- 0-56 52-113 109-170 30 24 97 67 31.6 413-583 65.5 135 1584- 0-72 69-147 144-222 40 39 112 86 39.6 461-681 72,5 161 1980.- 0-104 102-207 205 - 310 50 60 133 96 49.6 507-817 83,5 Clamping jaws Suitable for: High pressure machine vice No. 362075. for jaw width mm 113 i 135 1 160 £ 362076 Jaw with longitudinal grooves, other face smooth 44.55 54.45 69.30 suitable for colour code forjawwidth mm 113 I 135 1 1M h 362077 Jaw with fine serrations, other face with longitudinal grooves 55.94 68.31 86.63 suitable for colour code forjawwidth mm 113 i 135 i6o h 362079 Jaw with Vees, other face with longitudinal grooves 78.21 95.54 121.77 suitable for colour code 362077 Side pull and pull down jaws Jaws of high-quality hardened tool steel, with additional oxidation process for corrosion protection. Simple to fit on the vice. Easy to clean. Suitable for: GARANT-NC No. 360510 / 0465. HOLEX No. 362010. ALLMATIC No. 360400 / 0500 / 0600 / 0605 /1180 /1202 /1302 /1304 / 2250 / 2350. Application: Very high precision when clamping. The side pull and pull down effect presses the workpiece against the support and the stop. Side pull effect adjustable for pulling to the right or left. Note: Recommended for use in pairs forjawwidth mm 125 1 Side pull and pull down jaws 316.80 h mm 36 suitable for colour code Colour code: High press, vices TC TC-Garant LC LC-Garant