827 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.827

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 827 0827 ENG Lab2u

Hoffmann Group 47 hole . Zero setting device Special hardened steel. 359085 Function: 35 9085 - Level the spring-loaded probe face with the reference face of the body (e.g. using a straight edge) and set the dial indicator to -0.25. Place the zero setting device on the workpiece and feed the tool down on to spring-loaded probe face until the dial indicator reads 0. The tool is now positioned exactly 50 mm (± 0.01 mm) above the workpiece to be machined (dimension for input into machine controls). Advantage: 359085 - No damage to cutting edge of tool during setting. No feeler gauge or edge finder necessary. Application: 35 9085 - For setting tools (e.g. end mills) to zero and for determ ining the reference point of the machine spindle. Supplied with: 35 9085 - Wooden case, dial indicator and instruction manual. 1 jlVB Zero setting device 239.58 Dial indicator display mm 0.01 Height of body - reference face mm 49.75 Height of the spring-loaded probe face when the dial indicator reads 0 mm 50 Body0 mm 65 0 spring-mounted contact face mm 47 jgfVyilMfB Spare dial indicator for zero setter No. 359085 84.01 359086 u I 1 11 L 4 i r -j hole . Fine zero setter 359088- Anodised aluminium. Sturdy base plate of hardened steel (5 mm thick). Application: 35 9088 - For setting micro drills and micro mills etc. Supplied with: 35 9088 - Hexagon key L-wrench size 3 mm. Length mm Width mm Height mm “359088 Fine zero setter 137.12 48 25 100 359089 Spare dial indicator for fine zero setter No. 359088 84.01 359088 359089 Spare contact points - old type Self-centring due to taper shank. Suitable for: 3D edge finder No. 359100 (old version ). Application: For use in confined spaces and on low edges, steps etc. Note: Overall length (body + contact point) with standard contact point No. 359180 = 123 mm. Spherical point 0(35 9120) Spherical point 0(35 9180) Spherical point 0 (35 9220) Overall length L (35 9120) Overall length L (35 9180) Overall length L (35 9220) mm 359220 3 4 6 33 46 72 L A i 359120 - a. J U\ ... \ , n-s3 J 1 Mm 359180 S 35 9120 Contact point 03 mm short 33 mm 23.07 35 9180 Contact point 04 mm Standard 46 mm 20.30 -359220 Contact point 06 mm long 72 mm 31.88 359120 359085 827