826 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.826

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 826 0826 ENG Lab2u

Hoffmann Group 47 Edge finder (straight shank) The contact point has a flexible con nection to the body via a spring, with an alignment accuracy of 0.01 mm. All parts fully hardened and ground. Size 10/4 - With stepped contact point 10 and 4 mm 0. Application: For alignment of component reference surfaces or edges. Spindle speed approx. 600 rpm. Contact point 0 mm 6 1 10 10/4 1 1-359000 IKS 57.02 42.97 42.97 Tool shank 0 mm 6 10 10 Overall length mm 48 84 90 Spare springs for edge finder No. 359000 i 0xOverall length mm 2,6x25 i 4,6x40 StBV Spare spring for edge finder Na 359000 3.38 3.28 suitable for edge finder 359000 6 lOund 10/4 1. Start up -edge finder runs eccentric 2. Edge finder touches J the workpiece and runs true. 3. Edge finder jerks to side = reference point. Size 10/4 with stepped contact point Edge finder with indicator light The spring-mounted spherical tip protects the unit from damage if contact is too violent. Functional parts hardened and ground. 35 9070/9075 - Contact accuracy ± 0.01 mm. 35 9078 - Contact accuracy ± 0.005 mm. Function: When the spherical tip contacts a metallic component, batteries cause the lamp to light = Detection of the reference point. Application: Alignment of component reference surfaces or edges. Determination of bore centres to the machine spindle. 35 9075/9078 - When making contact in the Z axis, the reference length has to be determined using the pre-setter and taken into account. Supplied with: Special battery No. 081560 size 23A. Tool shank 0 mm 16 20 Ilf: 1 l B 2D edge finder with indicator light 115.83 115.83 3D edge finder with indicator light stub 149.49 149.49 3D edge finder with indicator light liUCMlal long - 212.85 Spherical point 0 mm 10 Overall length (359070) mm 94 Overall length (35 9075) mm 118 Overall length (35 9078) mm - 167 35 9078/3D hole . Optical zero setting device Special hardened steel. Function: Application: Supplied with: Approach the contact face with the tool upright. When the LED lights up, the reference dimension 50 mm (±0.01) has been reached. A safety spring range of approx. 2 mm is provided for overdrive. Size 50M is magnetic for horizontal use. For zeroing tools and for determining the machine spindle reference point. With test certificate and instruction manual. Special battery No. 081560 size 357. Type 50 I 50M I Optical zero setting device 157.91 179.69 Version Standard magnetic a mm 50 b mm 39 c mm 19 - 2 mm spring travel 826