825 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.825

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 825 0825 ENG Lab2u

Hoffmann Group 47 Marking tool 358740/358751-8752 - Body of aluminium with Weldon shank. Stepless adjustment of the pre-load force. Character depth 0.1 -0.3 mm. The greater the eccentricity L2, the heavier the marking. 358757-8759- Advantage: 35 8740/35 8751- Application: 358740/358751- Supplied with: 358740- Note: 358740/358751 358751/8752- 8752 - Surface sealing without weakening or damaging the material. Inscription speeds correspond to the maximum feed rate. High wear resistance, with long working life for the special needles. Suitable for inscriptions on round surfaces. Can be used on the lathe. High process reliability. Needles easily withdrawn, therefore quick needle change. 8752 - For marking on a wide variety of materials such as aluminium, titanium, steel, bronze, copper, brass, plastics etc. Irregularities up to 7 mm in the workpiece surface (depending on the profile) can be compensated. size 12 - including 3 needles No. 358745 size 0.3 - 0.5 - 0.8. Size 20 -including 3 needles No. 358745 size 0.3 - 0.6 -1.0. -8752 - Smaller needle tips allow inscriptions on harder surfaces. Order marking needles No. 358755 - 358759 separately. HOLEX marking points -SSF ith3 358740J2 Shank 0 d mm 12 1 M MULLA, oct 7iir on s 35 8740 HOLE . Marker 453.42 453.42 c\j .J L 0D, 0d mm 66 12 73 20 Radius mm KUH 1 ,5 i 0,6 i M 1 1,0 1 1 s 35 8745 holejC. Spare needle 99.99 99.99 99.99 99.99 99.99 suitable for AMF marker 358740 35 8751 35 8752 Amp< > AMF marker XL AMF marker L (791.01) (692.01) L, (35 8751) mm 124 L, (35 8752) mm 119 L (35 8751) mm 113 L (35 8752) mm 108 00,(358751) mm 4 00,(358752) mm 3 0d mm 20 0D (35 8751) mm 46 0D (35 8752) mm 42 0D, mm 4 L, mm Ljmm R,mm 35 8755 (297.-) (297.-) 53.5 0 0.5 35 8756 (297.-) (297.-) 53.5 0 1 -35 8757 Marking needle (297.-) (297.-) 53.5 0.1 1 35 8758 (297.-) (297.-) 53.5 0.2 1 35 8759 (297.-) (297.-) 53.5 0.3 1 suitable for 358752 358751 358740_20 Di 358745 D,bl 358757 /bGarant GRAVfix - Super quick NC needle marker for automatic tool changing With Weldon shank D = 20 mm (to DIN 18358). Advantage: Embossing process (virtually no notching effect) suitable even for thin-walled parts. High saving potential when marking parts, since no additional operation is required. Long tool-life. Application: Powered by 4 bar compressed air - with continuous air supply to the machine spindle by M-function - without continuous air supply via adaptor supplied. Supplied with: 4 engraving needles with brazed-on carbide tips size 70,90,100,110. Type AERO 1 -35 8760 GRAVfix NC needle marker 1014.75 With brazed-on carbide tip 80 HRC. Application: The harder the material, the flatter the tip angle. Point angle Degrees Engraving needle (1 piecc) 41.98 For use on Plastic and soft materials Aluminium Steel < 500 N/mm2 Stainless and heat treatable steels 825 358751