830 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.830

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 830 0830 ENG Lab2u

Hoffmann Group 47 Precision centre finders The dial indicator remains in the required position during the working process. With fixed cylindrical clamping shank 0 16 mm. 359610- With adjustable slides for a large working range. Accuracy: 0.005 mm centring or working accuracy. Application: Applicable horizontally and vertically. Alignment of bores, shafts, flat faces, reference edges and grooves centrally to the working spindle. Checking the concentricity of working spindles. Supplied with: 359600 - C OS - Contact point with ball 0 5 mm No. 359660 and curved contact point with ball 0 5 mm for external 0. 35 9610 - C III - Contact point with ball 0 5 mm No. 359660 (also applicable for external 0). Optional extras: Contact points, see No. 359650 - 359670. Contact pointcurved ball 0 5 Dial indicator reading mm 0,005 Can be fitted with COS CHI Centre finder C OS with damping shank 016 (including special accessories): centre finder centre finder 35 9600 mm 1045.44 Range mm0 Depth m Range mm0 Depth m 35 9610 Centre finder C III with damping shank 016 mm (2380.95) Inner 0 Contact point 5 mm 0 Contact point 1.6 mm 0 Right-angle contact point Extension 6-125 2-125 55 55 6-200 2-220 20-220 2-400 55 55 55 150 Length without shank and probe (35 9600) mm 92 Length without shank and probe (35 9610) mm 102 Outer 0 fnntart nnint n 0-150 0-220 Body 0 (35 9600) mm 60 V.UHU1U puim Right-angle contact point Extension y izj JJ 55 maximum slide 0 (35 9610) mm 116 0-300 150 maximum speed of spindle min-1 50-100 Flat Flat surface contact point Contact point Right-angle contact point 0- 90 28 Measuring range of the dial indicator mm 2.5 surfa- 120-160 90-280 40 Probe pressure N 1 ces - 90-280 40 Extension 280-480 - Probe Accessories from the 4-part set No. 35 9650. Suitable for: Centre finder No. 359600 and 359610. 35 9650 - Only for centre finder No. 359610. Supplied with: 35 9650 - Contact point, ball 01.6 mm. Angled contact point, ball 0 2.5 mm Flat face contact point for aligning faces up to 90 mm 0, Extension for increasing the working range and for inaccessible places. Angled contact point ball 02.5 mm. On request: Flat contact point 35 9650 Probe /extension set (283.14) 359655 Contact point, ball 01.6 mm 41.18 35 9660 Spare contact point, straight 05 mm 41.18 35 9665 Angled contact point 0 2.5 mm 41.18 359670 Angled contact point 0 5 mm 41.18 359655 Contact point straight No. 35 9660. On request Extension. 359665 BUS Articulated holders Steplessly adjustable mechanical central clamping of all joints. Shank length = 40 mm for direct clamping. 35 9680/9685 - Holder for dial indicators with shank 0 8 mm or dovetail. 359682- Holder for dial indicators with shank 0 6 or 8 mm or dovetail. Supplied with: 359685 - No. 359680 including HOLEX dial indicator No. 436341 size 0.4/40. Radius of action mm 120 170 35 9680 78.80 - 35 9682 Articulated holder - 88.11 35 9685 Articulated holder with lever dial indicator HOLEX 136.62 - 35 9685 830