287 Каталог WALTER 2012 Металлорежущий инструмент и оснастка Valenite для станков Стр.A283

Каталог WALTER 2012 Инструмент и оснастка Valenite Стр. A283 0287 ENG Lab2u

Turning Internal machining WALTER Valenite Walter Turn A SDUC / E SDUC K 93° 2= 7° positive toolholder range internal machining screw clamping Tool /W Dmin d1 f h l1 Designation (- 4 mm Y As Type A10K-SDUCR/L07 7 13 10 7 9 125 0° -9° DC..0702.. A12M-SDUCR/L07 7 16 12 9 11 150 0° -6.5° A16R-SDUCR/L07 7 20 16 11 15 200 0° -4° A20S-SDUCR/L11 11 25 20 13 18 250 0° -6° DC..11T3.. A25T-SDUCR/L11 11 32 25 17 23 300 0° -3° A10K-SDUCR/L07-R 7 15 10 7 125 0° -7° DC..0702.. A12M-SDUCR/L07-R 7 18 12 9 150 0° -5° A16R-SDUCR/L07-R 7 20 16 11 200 0° -4° E10M-SDUCR/L07-R 7 15 10 9 150 0° -5° E12Q-SDUCR/L07-R 7 18 12 11 180 0° -5° E16R-SDUCR/L07-R 7 22 16 13 200 0° -5° A20S-SDUCR/L11-R 11 25 20 13 250 0° -6° DC..11T3.. K 93° 1 33' t ll dl Xs For information on the rake angle y (for indexable inserts without geometry) and on the inclination angle Xs. see page A 453. Measured with master insert DC 070204 / DC 11T308. Bodies and assembly parts are included in the scope of delivery. A Boring bar in steel version E Boring bar made of solid carbide h D D Assembly parts Type DC..0702.. DC..11T3.. DC..11T3.. Dmin mm 13-22 25 32 FS2061 (Torx 7IP) 8 in-lb (0.9 Nm) FS2062 (Torx 15IP) 27 in-lb (3.0 Nm) FS2063 (Torx 15IP) 27 in-lb (3.0 Nm) J for insert Tightening torque C Torx key FS1490 (Torx 7IP) FS1465 (Torx 15IP/SW 3.5) FS1465 (Torx 15IP/SW 3.5) Accessories d1 mm 10 K600.10.28.086 Coolant adapter 12 K600.12.38.086 16 K600.16.40.137 20 K600.20.40.137 25 K600.25.44.137