237 Каталог WALTER 2012 Металлорежущий инструмент и оснастка Valenite для станков Стр.A233

Каталог WALTER 2012 Инструмент и оснастка Valenite Стр. A233 0237 ENG Lab2u

Turning External machining WALTER Valenite Walter CaptoTM C PRSC Walter CaptoTM ISO 26623 positive toolholder range external machining lever type clamping Tool di f l4 Dmin Dmin2 f l4 Dmin Dmin2 Designation in mm y As Type C5-PRSCR/L-35060-16 16 C5 1.378 2.362 35 60 0° 0° RC .1605.. C6-PRSCR/L-45065-16 16 C6 1.772 2.559 45 65 0° 0° C5-PRSCR/L-35060-20 20 C5 1.378 2.362 35 60 0° 0° RC..2006. C6-PRSCR/L-45065-20 20 C6 1.772 2.559 45 65 0° 0° C8-PRSCR/L-55080-20 20 C8 2.165 3.150 5.906 9.843 55 80 150 250 0° 0° C6-PRSCR/L-45065-25 25 C6 1.772 2.559 7.874 7.480 45 65 200 190 0° 0° RC .2507. C8-PRSCR/L-55080-25 25 C8 2.165 3.150 7.874 9.843 55 80 200 250 0° 0° Measured with master insert RC 0602M0 / RC 0803M0 / RC 10T3M0 / RC 1204M0 / RC 1605M0 ./ RC 2006M0 / RC 2507M0 Bodies and assembly parts are included in the scope of delivery. For information on the rake angle y (for indexable inserts without geometry) and on the inclination angle Xs, see page A 453. For information on Dmin and Dmin2, see page A 453. Assembly parts Type RC 1605 RC 2006 RC 2507 ( ) Shim AP157 AP158 AP405-RC2507 Shim for C8 AP404-RC2006 Pipe pin RS108 RS103 RS104 Lever KN111 KN112 KN113 Clamping screw FS344 (SW 2.5) FS2156 (SW 3) FS2145 (SW 4) Tightening torque 22 in-lb (2.5 Nm) 44 in-lb (5 Nm) 88 in-lb (10 Nm) h> Assembly plug MD102 MD102 MD102 Allen key ISO2936-2.5 (SW 2.5) ISO2936-3 (SW 3) ISO2936-4 (SW 4) ST) Cooling lubricant nozzle C5 FS1019 FS1019 SdJ Cooling lubricant nozzle C6 FS1019 FS1019 FS1476 Cooling lubricant nozzle C8 FS1479 FS1479 Accessories Type RC 1605 Shim AP188 RC 1606