886 Каталог KYOCERA 2017 Инструмент сборный и монолитный для станков Стр.M136

Каталог KYOCERA 2017 Инструмент режущий Стр. M136 0886 Lab2u

MFH High Feed Cutter Cutting Performance (GM) Face Mill (Cutter Dia. 040-050) Standard (Cutter Dia. 025-032) fz(mm/t) MFH20-...-4T, MFH22-...-4T, MFH25-...-5T MFH16-...-2T, MFH17-...-2T, MFH18-...-2T MFH25-...-4T, MFH28-...-4T, MFH32-...-5T MFH28-...-5T, MFH32-...-6T MFH20-...-3T, MFH22-...-3T MFH040R-..., MFH050R-... When using fine pitch type, reduce the cutting conditions compared with standard type. Recommended Cutting Conditions Рекомендованные режимы резания на станках M c Inserts Lead Angle 45° 20c Lead Angle 15° Lead Angle 072° High Feed Cutter Multi- Function Slot Mill Ball-nose Radius Others Insert Type Workpiece Material Обрабатываемый материал Toolholder Description Обозначение and Feed Rate(fz mm/t ) Recommended feed rate (Reference value) : ap=0.5mm Recommended Insert Grades Cutting Speed Vc (m/min) Скорость резания (м/мин) MFH16 -...-2T MFH20- ...-3T MFH20 -...-4T MFH25 -...-4T MFH25 -...-5T MFH32 -...-5T MFH32 -...-6T MFH -...-R-03 MEGACOAT NANO CVD Coated Carbide PR1535 PR1525 PR1510 CA6535 GM Carbon Steel 0.2 0.7 1.2 0.2 0.5 0.8 0.2 0.8 1.5 0.2 0.5 0.8 0.2 0.8 1.5 0.2 0.5 0.8 0.2 0.5 0.8 120 180 250 120 180 250 Alloy Steel 100 160 220 100 160 220 Mold Steel ( 40HRC) 0.2 0.5 0.9 0.2 0.4 0.6 0.2 0.6 1.2 0.2 0.4 0.6 0.2 0.6 1.2 0.2 0.4 0.6 0.2 0.4 0.6 80 140 180 80 140 180 Mold Steel (40 50HRC) 0.2 0.3 0.5 0.2 0.25 0.3 0.2 0.3 0.6 0.2 0.25 0.3 0.2 0.3 0.6 0.2 0.25 0.3 0.2 0.25 0.3 60 100 130 60 100 130 Stainless Steel (Austenitic related) 0.2 0.5 0.9 0.2 0.4 0.6 0.2 0.6 1.2 0.2 0.4 0.6 0.2 0.6 1.2 0.2 0.4 0.6 0.2 0.4 0.6 100 160 200 100 160 200 Stainless Steel (Martensitic related) 150 200 250 - 180 240 300 Stainless Steel (Precipitation Hardening) 90 120 150 - Gray Cast Iron 0.2 0.7 1.2 0.2 0.5 0.8 0.2 0.8 1.5 0.2 0.5 0.8 0.2 0.8 1.5 0.2 0.5 0.8 0.2 0.5 0.8 - 120 180 250 Nodular Cast Iron 0.2 0.5 0.9 0.2 0.4 0.6 0.2 0.6 1.2 0.2 0.4 0.6 0.2 0.6 1.2 0.2 0.4 0.6 0.2 0.4 0.6 - 100 150 200 - Ni-base heat-resistant alloys 0.2 0.3 0.6 0.2 0.25 0.4 0.2 0.4 0.8 0.2 0.25 0.4 0.2 0.4 0.8 0.2 0.25 0.4 0.2 0.25 0.4 20 30 50 20 30 50 Titanium Alloys 40 60 80 - 30 50 70 I IStandard I I Fine pitch : 1st Recommendation ik-2nd Recommendation Machining with coolant is recommended for Ni-base heat-resistant alloys and titanium alloys. The bold-faced number indicates a center value of recommended cutting condition. Adjust the cutting speed and the feed rate within the above conditions according to the actual machining situation. For machining center equivalent to BT30, reduce feed rate to 25% or less of the recommended condition. For slotting, internal coolant or center through coolant is recommended. Slotting and pocketing are not recommended for face mill type. Note for Machining Program (Approx. R) Shape Description Обозначение Insert Type Cutting Edge Angle y Approx. R (mm) Unmachined portion K (mm) Max. inclination angle of workpiece at contouring 1 Approx Max. inclination angle of workpiece at contouring nn ed \ \ portion . \ Cutting Edge Angle y MFH...-03-... GM 12 ° 1.6 0.39 90° M136