761 Каталог KYOCERA 2016 Инструмент режущий станочный Пластины Резцы Фрезы Сверла Стр.M75

Каталог KYOCERA 2016 Режущий инструмент для станков Стр. M75 0761 Lab2u

Cutting Performance of MECX End Mill Cutting Dia. Description Overhang Length A (mm) MECX08-S10-07-1T 16 - 10 MECX10-S10-07-1T 17 - 12 MECX12-S12-07-2T 18 30 16 MECX16-S16-07-3T 20 40 20 MECX20-S20-07-4T 20 40 25 MECX25-S25-07-5T 25 50 32 MECX32-S32-07-6T 30 50 Shape Machining with extended overhang length is not recommended for 8 and 10. The cutting performance list shows applicable range of JT Chipbreaker (PR830) with Standard flute-number type. For Multi-Edge type, use with 70% or less of ap. Cutting conditions of JS Chipbreaker (1) For MECX08 MECX12 Decrease the feed rate by 25% according to cutting capability list. (2) For MECX16 and over Decrease the feed rate and ap by 30% according to cutting capability list. Description MECX08-S10-07-1T MECX10-S10-07-1T MECX12-S12-07-2T MECX16-S16-07-3T MECX20-S20-07-4T MECX25-S25-07-5T MECX32-S32-07-6T JT Chipbreaker Vc=150m/min Workpiece Material: S50C IShouldering (Cutting width ae = D/2) . 0.05 0.1 0.15 fz (mm/t 0.05 0.1 0.15 fz (mm/t 0.05 0.1 0.15 fz (mm/t 6 5 I4 2 1 0 6 5 1 4 1 0.05 0.1 0.15 0 0.05 0.1 0.15 fz (mm/t) fz (mm/t; Slotting Ramping and Helical Milling 0.05 0.1 0.15 fz (mm/t 0.05 0.1 0.15 fz (mm/t 0.05 0.1 0.15 fz (mm/t Cutting Performance of MECX Face Mill JT Chipbreaker Vc=150m/min Workpiece Material: S50C) Shape Cutting Dia. Description Overhang Length A (mm) 32 MECX032R-07-8T-M 100 40 MECX040R-07-10T-M Ol o MECX050R-07-12T-M 63 MECX063R-07-14T-M Description MECX032R-07-8T-M MECX040R-07-10T-M MECX050R-07-12T-M MECX063R-07-14T-M Shouldering (Cutting width ae = D/2) Slotting is not recommended. fz (mm/t; fz (mm/t; fz (mm/t fz (mm/t fz (mm/t fz (mm/t fz (mm/t; fz (mm/t; M75