502 Каталог KYOCERA 2016 Металлорежущий инструмент для токарной обработки на станках Стр.H10

Каталог KYOCERA 2016 Токарные резцы с пластинами Стр. H10 0502 ENG Lab2u

CUT-OFF CUT-OFF TOOLHOLDERS (SUB SPINDLE TOOLING) KTKFS (Small Diameter Cut-Off for Sub Spindle) Toolholder Dimensions Dimension T shows the distance from the toolholder to the cutting edge. Only Right-hand is available for L4 dimension TKFS (0Dmax) Insert Right-handed Insert Shown Part Number TKFS127l 100-S 150-S 200-S TKFS167l 150-S 200-S Dimensions (in) W inch 0D Max Main Spindle As Fig.2 shows, the cutting diameter of the insert is measured when the lead edge passes 0.039" past the center line of part. Fig.1 Recommended Cutting Conditions H11 Sub Spindle Main Spindle Sub Spindle Fig.2 > As Fig.1 shows, use KTKFL (Left-hand) when the distance between main spindle and sub spindle are long. > As Fig.2 shows, KTKFS is recommended when the workpiece diameters are small and the distance between the main spindle and sub spindle are short H10 Kyocera - O