728 Каталог KORLOY 2020 Инструмент и оснастка для станков по металлу Стр.E270

Каталог KORLOY 2020 Инструмент для станков по металлу Стр. E270 0728 Lab2u

Technical Information for HFM 0 Performance evaluation High speed machining Workpiece STD11 (HrC40 45) Insert LPM(E)W0402DDR Recommended grade PC2505 (1st), PC2510 (2nd) o 50 E E 130 E 0 1 100 80 fz (mm/t) 0.2 0.3 0.4 0.5 0.6 Workpiece STD11(Over HrC60) Insert LPM(E)W0402DDR Recommended grade PC2505 (1st), PC2510 (2nd) m m/ 80 (m c i 50 30 C20 HFM Competitor C Competitor B Ifelocity 25°o and feed rate 25% k increased fz (mm/t) 0.2 0.3 0.4 0.5 High feed machining Workpiece KP4M (HrC32), NAK80 (HrC43) Insert LPMT0402DDR-MF Recommended grade PC5300 (1st), PC2510 (2nd) 180 /m m/ (m Q 150 S 130 .E 100 0.9 1.0 Workpiece Ti-6AL-4V (HrC40 45) Insert LPMT0402DDR-MF Recommended grade PC5300 (1st), PC5400 (2nd) Competitor A HFM fz (mm/t) 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 0 High hardness machining Recommended grades according to interruption P Mild steel, P Alloy steel Carbon steel P Pre-hardened P Alloy tool steel steel 30 40 50 60 Hardness (HRC) Recommended grades according to velocity P Mild steel, Carbon steel P Alloy steel P Pre-hardened P Alloy tool steel steel o /m280 (m240 s 200 e & 160 sp o> 120 ti 80 40 30 40 50 60 Hardness (HRC) M Stainless S HRSA steel 20 30 40 50 Hardness (HRC) M Stainless S HRSA steel 180 150 130 100 70 40 10 20 30 40 50 Hardness (HRC) Effective machining 270 - BT50 and above, HRM(D) recommended Chip removal rate Q (cm3/min) - 08 020, HFM recommended Milling m 100.0 Machining center - BT40 and under, HFM recommended ”e 900 a 800 te 70.0 60.0 > 50.0 remo 40.0 a. 30.0 020 and above, HRM(D) recommended Chi 20.0 10.0 0.0 HFM HRMD