945 Каталог HOFFMANN GROUP 2016 Слесарно-монтажный и измерительный инструмент Вер. 47 ENG Стр.945

Каталог HOFFMANN GROUP 2016 Слесарный и мерительный инструмент Стр. 945 0945 ENG Lab2u

Hoffmann Group 47 Screw extractor for right-hand threads (left-hand threads) Made of chrome vanadium steel. The sharp edges of the flutes dig into the drilled screw and allow it to be unscrewed. With square drive for use with tap wrench etc. 082860- Fine flutes. 082862 - Coarse flutes, especially for soft materials (aluminium, brass, stainless steel). 08 2864 - Fine flutes with„Hi Trac" cross-section for better grip. Suitable for: 082860- Steel. 082862 - Aluminium, brass, stainless steel. 082864- hardened steel. Application: For extraction of broken off screws with right-hand thread (pre-drill the hole 0 as listed in the table; turn the screw extractor anti-clockwise). 9 082860 082862 082864 c ro Type I 2 1 3 I 4 I 5 7 I 1 1082862 Screw extractor with coarse flutes 6.09 7.48 7.18 8.96 9.41 11.14 snuunm'O 1082860 Screw extractor with line flutes 1.58 1.58 1.87 2.39 2.99 4.76 7.72 11.19 1082864 Screw extractor "HiTrac" 1.87 1.87 2.23 2.84 3.55 5.70 Pre-drill 0(082862) mm 2 2.8 4 5.5 7 10.2 Pre-drill 0(08 2860,08 2864) mm 1.8 3.2 4.5 6.5 8.5 12 15 20 suitable for screws/bolts (08 2862) M3-M4 M5-M7 M8 M10-M12 M16 M18-M22 suitable for screws/bolts (08 2860) M3-M4 M5-M7 M8-M10 Mil M14 M16-M18 M18-M24 M24-M33 M33-M45 suitable for screws/bolts (08 2864) M4 M5-M7 M8-M11 M12-M14 M16-M20 M20-M24 suitablefor pipe spigots (couplings) inch 1/4 3/8 1/2 3/4 Screw extractor sets Supplied with: 08 2870 - 6 extractors No. 082862 size 1; 2; 3; 4; 5; 6. 08 2872 - 6 extractors No. 082860 size 1; 2; 3; 4; 5; 6. 08 2874 - 6 extractors No. 082864 size 1; 2; 3; 4; 5; 6. wm CrrDUJ ovtrartnr cat ILniara in a uiillat 10 828 jucW cMialLUi III a WallcL with coarse flutes 51.68 1082872 Screw extractor set 6-piece in a box with line flutes 15.84 EZ 828 a £fcm b Screw extractor set 6-piece in a box "Hi Trac" 18.77 082872 082870 082874 witS Screw extractor set with twist drills for right-hand or left-hand threads Extractors of tough chrome vanadium molybdenum steel, jobber drills of HSS, burnished. Application: For extracting damaged or sheared-off screws with right-hand or left- hand threads, sizes M4 - Ml 6. Pre-drill with the drill supplied, then insert the screw extractor, push the ring spanner right down and extract the screw without tilting. Content: 8 screw extractors (hexagon 2/2.5/3/4/5/6/8/10mm), 8 jobber drills (0 2.3 / 2.8 / 3.4 / 4.5 / 5.7 / 6.8 / 9 /11 mm), complete in a metal case with foam inlay. 1082880 Screw extractor set 16-piece with jobber drills in a metal case 75.44 945