906 Каталог HOFFMANN GROUP 2016 Слесарно-монтажный и измерительный инструмент Вер. 47 ENG Стр.906

Каталог HOFFMANN GROUP 2016 Слесарный и мерительный инструмент Стр. 906 0906 ENG Lab2u

Hoffmann Group 47 Pneumatic straight die grinder, orbital sander Pneumatic straight grinder Size G2440 - Powerful slow-running version with support handle. Maximum speed 4,300 rpm. 07 9447/9448 - Powerful and robust smooth-running straight die grinders. The safety switch prevents accidental switching on. Application-optimised maximum speeds between 8,000 and 25,000 rpm. Collet 0 6 mm. 079447- Short design, length 215 mm. 07 9448 - With long, slim spindle, ideal for holes length 317 mm. Including the necessary coupling adaptors. Selected service kits: Sets of replacement parts for most Atlas Copco pneumatic tools can be supplied on request for preventive maintenance and servicing. Supplied with: Spare part: Manufacturer's designation 079447 Pneumatic straight grinder collet 06 mm Pneumatic straight die grinder G2414, 06 mm short Output power maximum speed maximum air consumption Connection thread recommended hose size (internal 0) Weight Operating noise maximum vibration to EN SI 50 i 5200 I 5250 I G2440 - 404.10 341.10 341.10 341.10 341.10 - w 500 850 900 950 550 min-1 8500 15000 20000 25000 4300 l/min 252 432 540 870 342 inch 3/8"BSP 3/8"BSP 3/8" BSP 3/8" BSP 1/4“ BSP mm 13 13 13 13 10 kg 0.78 0.78 0.78 0.78 0.9 dB(A) 70 76 81 85 80 m/s2 <2.5 2.5 <2.5 <2.5 <2.5 Manufacturer's designation 5085 i 5150 1 5200 i 5250 JHUaOtyeo Pneumatic straight die grinder G2424, 0 6 mm long 440.10 440.10 440.10 440.10 Output power W 440 750 850 900 maximum speed min-1 8500 15000 20000 25000 maximum air consumption l/min 252 432 540 870 Connection thread inch 3/8" BSP recommended hose size (internal 0) mm 13 Weight kg 0.96 Operating noise dB(A) 70 76 81 85 maximum vibration to EN m/s 5.3 <2.5 <2.5 3.5 Pneumatic orbital sander Powerful orbital sander with urethane hook and loop backing pad 0150 mm. Easy to use due to light-weight composite housing and ergonomic hand application area. Robust, smooth-running, and low-vibration pneumatic drive with steel cylinder, low noise level. Size G2438-65N - For roughing and intermediate sanding with 5 mm orbital stroke without dust extraction. Size G2438-65C - For roughing and intermediate sanding with 5 mm orbital stroke. Connection for external suction. Size 69043 - For fine sanding with 2.5 mm orbital stroke. Integral extraction via a hose and dust bag supplied including hook and loop pad No. 079690 size 22290. Size 69029 - For roughing and intermediate sanding with 5 mm orbital stroke. Connection for external extraction including hook and loop pad No. 079690 size 22290. Size 58436 - Combination sander, permits orbital abrasion for coarse and intermediate sanding, with 5 mm orbital stroke combined with central rotary movement for high rates of material removal Connection for external suction. Note: See No. 567775 for velour abrasive discs. DynaMaze hook and loop pads for No. 079655 and 079656 can be found under No. 079690 size 22290 in the spare parts list. Manufacturer's designation 69043 69029 58436 iKtiUfiUiKuusui eiVi’-u- 197.10 197.10 Pneumatic orbital sander 326.79 270.63 500.58 maximum speed min-1 12000 maximum air consumption l/min 450 450 654 540 540 Type of extraction Own dust extraction External External - External Orbital stroke mm 2.5 5 5 5 5 Weight kg 0.8 0.8 1.3 0.9 0.9 Operating noise dB(A) 77 77 82 85 85 maximum vibration to EN m/s2 1.64 1.64 2,67 <2.5 <2.5 rotary movement 906