733 Каталог HOFFMANN GROUP 2016 Слесарно-монтажный и измерительный инструмент Вер. 47 ENG Стр.733

Каталог HOFFMANN GROUP 2016 Слесарный и мерительный инструмент Стр. 733 0733 ENG Lab2u

Carbide DIN 8039 ISO 5468 4 = Carbide masonry drills Drill tipped with hard and tough carbide inserts and brazed at high temperature. Asymmetrical flute profile for good transport of drill dust. Hammer and rotary bits with strong carbide cutter tip. Application: Primarily for drilling dowel holes with hammer drills in concrete, masonry, natural and synthetic stone. Also for rotary drilling in hard and softwood, plastics, acrylic and ceramic. Also suitable for drilling hardened steel due to corrected cutting edge. Size 14-20- With recessed shank. 786000 concrete. Drill 0 mm jjgsS Carbide masonry drill 1.60 Flute length mm 30 overall length Shank 0 mm 60 mm 3 1.75 40 70 3.5 1.31 40 75 4 1.46 50 85 4.5 1.31 50 85 5 1.60 50 85 5.5 1.39 60 100 6 1.75 60 100 6.5 1.75 60 100 7 2.33 60 100 7.5 Size 12-20- With recessed shank. 1.82 80 120 Drill 0 mm 8,3 I 9 9,5 10 1 11 12 I 13 i 14 I 16 1 n I 20 Carbide masonry drill 3.20 2.33 2.69 2.40 3.20 3.20 5.20 5.50 7.38 9.86 12.67 Flute length mm 80 80 80 80 85 85 90 90 95 100 100 overall length mm 120 120 120 120 150 150 150 150 160 160 160 Shank 0 mm 8.5 9 9.5 10 11 12 13 10 10 10 12.5 786005 786005 Drill 0 mm 3 3,5 1 4 1 4,5 1 5 i 5,5 6 6,5 7 lilll.i Q) BOSCH Carbide masonry drill 2.03 2.09 2.03 2.21 1.51 2.28 1.91 2.41 2.41 Flute length mm 40 40 40 40 50 50 60 60 60 overall length mm 70 70 75 75 85 85 100 100 100 Shank 0 mm 3 3.5 4 4 5 5 5.5 6 6.5 7 Drill 0 mm 8 1 9 io 11 1 12 1 14 1 16 s n 20 O BOSCH Carbide masonry drill 2.48 2.97 3.18 3.96 4.27 7.68 11.19 14.06 18.17 Flute length mm 80 80 80 90 90 90 100 100 100 overall length mm 120 120 120 150 150 150 160 160 160 Shank 0 mm 8 9 10 11 10 10 12.3 12.3 12.3 Carbide masonry drill sets Number of drills 5 I 8 786080 1 Carbide masonry drill set 8.02 13.72 Content: Drill Na 786000 Size (0)4; 5; 6; 8; 10 mm Size (0)3; 4; 5; 6; 7; 8; 9; 10 mm Carbide Fine stoneware / tiles drilling set 2-piece set. A drill with a diamond-ground carbide tip with a patented centring tip for highly accurate start positioning and exact holes without break-outs. With 10 mm shank. A carbide drill for use in standard drill chucks. With %" hexagonal shank. Application: For very hard stoneware tiles up to Mohs / scratch hardness class 9 and for glass and porcelain. Note: Not suitable for hammer drills. Maximum spindle speed 200 rpm. No cooling required. 786080 7. Drill a hole in the tile 2. Drill a dowel anchor hole In the masonry < . Drill 0 mm 6 1 8 1 io 1 Fine stoneware drill /tiles drill 27.32 31.58 35.74 overall length mm 115 120 120 733 787035