703 Каталог HOFFMANN GROUP 2016 Слесарно-монтажный и измерительный инструмент Вер. 47 ENG Стр.703

Каталог HOFFMANN GROUP 2016 Слесарный и мерительный инструмент Стр. 703 0703 ENG Lab2u

Hoffmann Group 47 Arennsteig Wall grooving chisels Strong, flat-oval shank with wedge-shaped blade. Blade bright finished, completely through hardened, can be reground many times. Material; Chrome vanadium air hardened steel, painted surface. JV. overall length mm 250 I EFAttJlTlB Wall grooving chisel 10.20 Blade width mm 34 Shank cross section 23x13 Arennsteig Mortise chisels Made of octagonal steel bar, hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering. Material: Chrome vanadium air hardened steel, painted surface. Application: For chiselling between drill holes. Blade mm 10x2 i 10x3 I 743400 7.33 7.43 Shaft length 125 A rennsteig Rivet snap setter and closer Octagonal shank, bright finished head. Head specially annealed to prevent splintering. Standard: DIN 6434 and DIN 6435. Material: Chrome vanadium air hardened steel, painted surface. for rivet shank 0 mm 2 1 3 1 4 1 5 1 6 s 744600 1.98 1.98 2.18 3.30 3.37 Rivet snap doser 2.15 2.15 2.44 3.44 4.09 Head 0(744700) mm 3.5 5.2 7 8.8 10.5 Shank thickness (maximum) mm 10 10 12 14 16 overall length mm 100 100 100 110 110 Hole size (744600) mm 2.5 3.5 4.5 6 7 Number of tools 5 744610 Rivet snap setter set in a plastic dip 13.82 Content: 1 each rivet snap setter Na 744600 Size 2 6 Number of tools 5 a 744710 Rivet snap doser set in a plastic clip 15.25 Content: leach rivet closer 744700 Size 2 6 Chisel and taper pin punch sets Flat and cross-cut chisels for metal, and taper pin punches and centre punches with octagonal shanks, through hardened; chisels can be reground many times. Head specially annealed to prevent splintering, 744600 744700 744610 744710 Chisel and taper pin punch sets, special quality Special quality = Highest possible point hardness - approx. 59 HRC - with exceptional toughness. Material: Extra chrome vanadium steel, chrome-plated. Number of tools EH 1 H I e 745100 eb- Chisel and taper pin punch set in a plastic holder 48.21 76.63 Content: Centre punch (mm) Ipc. 120X12 1 pcs. each 100x8; 120x10 Taper pin punch (mm) 1 pceach 04; 5 1 pcs. each 02; 4; 5 Flat chisel (mm) 1pc each 165; 180 1 pcs. each 130;165; 180 Cross-cut chisel (mm) 1 pc. 165 1 pcs. each 130; 165 Scriber, double-ended Ipc. Chisel and taper pin punch set, standard quality Material: Chrome vanadium steel; painted surface. Number of tools 745200 Content: Flat chisel 1 cross-cut chisel (mm) Taper pin punch 1 centre punch (mm) I SS - 16.39 1 pc each 125; 150 mm Ipc 125 1 pc. each 120x2; 150x3 mm Ipc 120 745100 11 745200 703 745100_6