1042 Каталог HOFFMANN GROUP 2015 Инструмент режущий слесарный измерительный Стр.1042

Каталог HOFFMANN GROUP 2015 Tools Инструменты Ver 46 Стр. 1042 1042 ENG Lab2u

1 HOLEX Sander band, conical Version The band holder rubber body expands at high speed to hold the sander band in place. The full width of the band can be used, it jfesagfi does not slip and can be replaced quickly and easily (twist in the direction of slots when fitting/removing). Only compatible with ground sander band holders. Application Sander bands are predominantly used for sanding down tasks which require the removal of large amounts of material - even at sharp edges. Suitable for/ vc m/s AlMg <900 N <1400 N <55 HRC <60 HRC <67 HRC Carbide INOX Ti GG(G) CuZn Plastics & GRP Wood Stone Varnish Uni max 55 3850-3870- O 553871/3873- O 55 3875/3877- o Sander band holder, conical Version Slotted, resilient rubber body with steel shank Ground outer face for best concentricity. Maximum 0x head length mm 20x63 29x30 36x60 holejC, Sander band holder K 55 3830 slit, conical shank 0 6 mm Smallest 0 mm 14 22 22 Maximum speed rpm 21 000 21000 13 500 Sander band, conical Suitable for Sander band holder No. 55 3830. Version Made of non-tearing, synthetic resin bonded material with long service life and good grit adhesion. 55 3850-3870- Standard Aluminium Oxide (A) for general-purpose grinding work. Largest sleeve 0x sleeve width mm 20x63 29x30 36x60 s 55 3850 HOLEX Sander band, conical (A) 40 grit coarse 50 s 55 3860 HOLEX Sander band, conical (A) 80 grit medium 50 s 55 3870 HOLEX Sander band, conical (A) 150 grit fine 50 k 55 3871 HOLEX Sander band, conical (ZA) 40 grit coarse 50 s 55 3873 HOLEX Sander band, conical (ZA) 80 grit medium 50 k 55 3875 HOLEX Sander band, conical (CER) 40 grit coarse 50 k 55 3877 HOLEX Sander band, conical (CER) 80 grit medium 50 20x63 29X30 HOLEX Sander roller Suitable for/ vc m/s AIMg <900 N <1400N <55 HRC <60HRC <67 HRC Carbide INOX Ti GG(G) CuZn Plastics & GRP Wood Stone Varnish Uni max 55 3880-3895- O SjdS Sander roller holder Version Burnished sanding roller holders with shank 0 6 mm to take sanding rollers No. 55 3880 ff. 553835 Mounting 0x overall length mm 3x63 3x70 5x85 lf= cc aoac HOLEX Sander roller holder 55 3835 6 mm 0 shank 5 Sander roller Suitable for Sander roller holder No. 553835. Version Sander rollers consisting of wound up abrasive cloth with Aluminium Oxide (A). 55 3880-3885 - Cylindrical form. 55 3890-3895- Conical shape for restricted places. 553890 Sander roller 0x sander roller length mm 6X38 10X25 10X38 13X38 16X38 20X38 o 55 3880 HOLEX Sander roller, cylindrical (A) 80 grit medium 50 k 55 3885 HOLEX Sander roller, cylindrical (A) 150 grit fine 50 k 55 3890 HOLEX Sander roller, conical (A) 80 grit medium 50 k 55 3895 HOLEX Sander roller, conical (A) 150 grit fine 50 Suitable for holder mounting 0x overall length mm 3X63 3X63 3X70 3x70 3X70 5X85 Maximum speed rpm 26000 26000 26000 26000 18000 18000 1042 Main catalogue Hoffmann Group 46