1041 Каталог HOFFMANN GROUP 2015 Инструмент режущий слесарный измерительный Стр.1041

Каталог HOFFMANN GROUP 2015 Tools Инструменты Ver 46 Стр. 1041 1041 ENG Lab2u

i..„ e HOLEX Grinding sleeve holder, grinding sleeves and abrasive flap sleeves Version The band holder rubber body expands at high speed to hold the sander band in place. The full width of the band can be used, it does not slip and can be replaced quickly and easily (twist in the direction of slots when fitting/removing). Only compatible with ground sander band holder systems. Application Sander bands are predominantly used for sanding down tasks which require the removal of large amounts of material - even at sharp edges. Suitable for/ vc m/s AIMg OOON <1400 N <55 HRC <60 HRC <67 HRC Carbide INOX Ti GG(G) CuZn Plastics &GRP Wood Stone Varnish Uni _5r max 55 3700-3740- 55 3760/3780- o 55 3790/3795 - 0 55 3820-3823 - o Grinding sleeve holder, cylindrical Version Slatted, resilient rubber body with steel shank Ground outer face for best concentricity. Head 0x length mm 10X20 15X30 22X20 30X20 30X30 45X30 60X30 HOLEX K 55 3600 Abrasive sleeve holder, slit, shank 0 6 mm Minimum speed rpm 38000 25000 18000 13000 13000 9000 6500 Maximum speed rpm 55000 36000 26000 19100 19100 12700 9500 Abrasive sleeve, cylindrical Suitable for Grinding sleeve holder No. 55 3600. Version Made of non-tearing, synthetic resin bonded material with long service life and good grit adhesion. Unsuitable for use with cooling lubricants. 55 3700-3740- Regular Aluminium Oxide (A). 55 3760/3780- Zirconium Aluminium Oxide (ZA). 55 3790/3795- Ceramic grit (CER). Sleeve 0x sleeve width mm 10X20 15x30 22X20 30x20 30x30 45X30 60X30 Q s 55 3700 holejC, Abrasive sleeve (A) 40 grit coarse 50 a 553710 HOLEX Abrasive sleeve (A) 60 grit medium coarse 50 k 55 3720 holejC, Abrasive sleeve (A) 80 grit medium 50 k 55 3740 HOLEX Abrasive sleeve (A) 150 grit fine 50 k 55 3760 HOLEX Abrasive sleeve (ZA) 36 grit coarse 50 k 55 3780 HOLEX Abrasive sleeve (ZA) 80 grit medium 50 s 55 3790 Luk&s Abrasive sleeve (CER) 40 grit coarse 50 ej 55 3795 LumAs Abrasive sleeve (CER) 60 grit medium 50 i 6 Abrasive flap sleeve, cylindrical Suitable for Version Application Grinding sleeve holder No. 553600. Abrasive strips of Zirconium Aluminium Oxide (ZA) fabric densely packed around a stable core. Due to the even wear of the individual abrasive strips, new abrasive fabric is constantly being exposed, thus increasing the service life and material removal rate several-fold. For aggressive surface grinding work as an alternative to sander bands and flap wheels. For use exclusively in the direction of rotation of the support body. The direction of rotation is marked on the core of the sleeve. 3. Sleeve 0x sleeve width mm 30x30 45x30 60x30 0 k 55 3820 HOLEX Abrasive flap sleeve (ZA) 40 grit coarse 10 k 55 3821 HOLEX Abrasive flap sleeve (ZA) 60 grit medium coarse 10 s 55 3822 HOLEX Abrasive flap sleeve (ZA) 80 grit medium 10 s 55 3823 HOLEX Abrasive flap sleeve (ZA) 120 grit fine 10 External 0 mm 45 60 75 Maximum speed rpm 19100 12700 9500 ZA m Main catalogue Hoffmann Group 46 1041