| Обновлено 2020-05-02 15:19:32 |
|
Слесарно-монтажный ручной инструмент / Hand tools FACOM | Каталог FACOM 2005 Профессиональный ручной инструмент (Всего 899 стр.) |
|||||
823 Каталог FACOM 2005 Профессиональный ручной инструмент для предприятий Стр.826 |
|||||
Каталог FACOM 2005 Профессиональный ручной инструмент Стр. 826 0823 ENG Lab2u SPECIALIST TOOLING SPECIALIST TOOLING Memory protector DX.11 STORED DATA SAVER Modern vehicles carry an increasing amount of electronics. Changing a battery can lead to a number of problems for the user loss of car radio pre-settings some dashboard displays (onboard computer) settings for programmable accessories (telephones electric seats etc.). In addition computers used for injection systems air bags anti-lock air-conditioning etc. store operating parameters which may be lost when power is interrupted. A device to guard against this has added service value. The DX.11 provides this safeguard even in the event of unexpected current draw e.g. horn or flashers. Battery tools MEMORY PROTECTOR DX.11 Saves configuration and stored data of vehicle accessories when battery is changed or power is temporarily interrupted. Diodes for checking correct battery connection. All makes. 12 and 24V external battery supply D 180 g. Safety 12 V SURGE LIMITER DX.8-12 Protects electronic units against voltage surges due to external influences welding static electricity potable tools (grinder drill sander etc.) connection or disconnection of a second battery in parallel etc. Cable length 300 mm. Installation connect the clips to the battery terminals (if it is disconnected) or in place of the battery (if it is removed from the vehicle). F LxWxH D Mm g DX.8-12 100 x 20 x 45 190 r N J p- Jf 826 F04 On-line catalogue on catalogue FACOM F05 |
|||||
См.также / See also : |
|||||
Отклонения размеров / Fit tolerance table |
Соотношение твердостей Таблица / Hardness equivalent table |
||||
Типы резьб / Thread types and applications |
Аналоги сталей / Workpiece material conversion table |
||||
Отверстия под резьбу / Tap drill sizes |
Обороты в скорость / Surface speed to RPM conversion |
||||
Перевод дюймов в мм / Inches to mm Conversion table |
Перевод единиц в систему СИ / SI unit conversion table |
||||
| |
|||||
| FACOM | |||||
| |
|||||
![]() Каталог FACOM 2014 Профессиональный слесарный инструмент (1106 страниц) |
|||||
![]() Каталог FACOM 2013 Ручной инструмент и оборудование (англ. яз.) (1108 страниц) |
|||||
![]() Каталог FACOM 2009 Ручной инструмент (869 страниц) |
![]() Каталог FACOM 2005 Профессиональный ручной инструмент (англ. яз.) (899 страниц) |
||||
| |
|||||
|
Каталоги ручного инструмента / Hand tools catalogs |
|||||
| Каталог FACOM 2005 Профессиональный ручной инструмент (Всего 899 стр.) | |||||
| |
|||||
820 | 821 | 822 | 824 | 825 | 826 |
|
Lab2U | Catalogs | Tap drill sizes | Speed to RPM | Material table Разработчики сайта / Developers of site |
|
Поиск на сайте Lab2u.ru с помощью поисковых систем ЯНДЕКС, BING, GOOGLE:
|
||
|
|
||









