279 Каталог WALTER 2012 Металлорежущий инструмент и оснастка Valenite для станков Стр.A275

Каталог WALTER 2012 Инструмент и оснастка Valenite Стр. A275 0279 ENG Lab2u

WALTER Valenite Turning Internal machining Walter Turn A PTFN k 91° negative toolholder range internal machining lever type clamping Tool Dmin d1 f h l1 Designation -1 mm Y As Type A16R-PTFNR/L11 11 20 16 11 15 200 -6° -14° TN .1103.. A20S-PTFNR/L11 11 25 20 13 18 250 -6° -12° A25T-PTFNR/L11 11 32 25 17 23 300 -6° -10° A25T-PTFNR/L16 16 32 25 17 23 300 -6° -13° TN 1604 A32T-PTFNR/L16 16 50 32 22 30 300 -6° -12° A40T-PTFNR/L22 22 50 40 27 37 300 -6° -11° TN 2204 Measured with master insert TN 160408 / TN 220408. For information on the rake angle y (for indexable inserts without geometry) and on the inclination angle Xs, see page A 453 Bodies and assembly parts are included in the scope of delivery. Assembly parts Type Dmin mm TN ..1103 20-32 TN 1604 32-40 TN 2204 50 A Shim AP137-TN1616 r < 1,6 AP138-TN2216 r < 1,6 Lever KN127 KN101 KN102 Clamping screw FS2182 (SW 2) FS351 (SW 2.5) FS352 (SW 3) Tightening torque 18 in-lb (2.0 Nm) 18 in-lb (2.0 Nm) 44in-lb (5.0 Nm) n Pipe pin RS101 RS102 Assembly plug MD101 MD101 Allen key ISO2936-2 (SW 2) ISO 2936-2.5 (SW 2.5) ISO 2936-3 (SW 3) Accessories Type Dmin mm TN 1604 32-40 TN 2204 50 A Shim AP137-TN1608 r < 0.8 AP138-TN2208 r < 0.8