278 Каталог WALTER 2012 Металлорежущий инструмент и оснастка Valenite для станков Стр.A274

Каталог WALTER 2012 Инструмент и оснастка Valenite Стр. A274 0278 ENG Lab2u

WALTER Valenite Turning Internal machining k 75° negative toolholder range internal machining lever type clamping Tool o Dmin d1 f h l1 Designation mm Y As Type A25T-PSKNR/L12 12 32 25 17 23 300 -6° -11° SN .1204.. A32T-PSKNR/L12 12 40 32 22 30 350 -6° -10° A40T-PSKNR/L12 12 50 40 27 37 400 -6° -10° Measured with master insert SN 120408. For information on the rake angle y (for indexable inserts without geometry) and on the inclination angle Xs, see page A 453 Bodies and assembly parts are included in the scope of delivery. Assembly parts Type Dmin mm SN 1204 25 SN 1204 32 SN 1204 40 Shim AP141-SN1216 r < 1.6 AP141-SN1216 r < 1.6 S= Lever KN128 KN121 KN102 t mu Clamping screw FS332 (SW 2.5) FS2129 (SW 3.0) FS352 (SW 3) 11 tut Ul Tightening torque 18 in-lb (2.0 Nm) 22 in-lb (2.5 Nm) 44in-lb (5.0 Nm) n Pipe pin RS102 RS102 -c+- Assembly plug MD101 MD101 / Allen key ISO2936-2.5 (SW 2.5) ISO2936-3 (SW3.0) ISO 2936-3 (SW 3) Accessories Type SN 1204 Dmin mm 40 o Shim AP141-SN1208 r < 0.8 A 274