282 Каталог WALTER 2012 Металлорежущий инструмент и оснастка Valenite для станков Стр.A278

Каталог WALTER 2012 Инструмент и оснастка Valenite Стр. A278 0282 ENG Lab2u

WALTER Valenite Turning Internal machining Walter Turn A PVUB negative toolholder range internal machining lever type clamping Tool S7 Dmin dl f ll Designation k A mm Y As Type A20Q-PVUBR/L11 11 25 20 13 180 0° -6° VB/C. 1103. A25R-PVUBR/L11 11 32 25 17 200 0° -6° A32S-PVUBR/L16 16 40 32 22 250 0° -8° VB/C..1604.. A40T-PVUBR/L16 16 50 40 27 300 0° -8° Measured with master insert VB 110304 / VB 160408. For information on the rake angle y (for indexable inserts without geometry) and on the inclination angle Xs, see page A 453 Bodies and assembly parts are included in the scope of delivery. Assembly parts Type Dmin mm VB/C..1103.. 25-32 VB/C..1604.. 40 VB/C..1604.. 50 Shim AP153 r < 0.8 JL Lever KN118 KN114 KN110 a Pipe pin RS101 -EM3 Clamping screw FS347 (SW 2) FS332 (SW 2.5) FS351 (SW 2.5) Tightening torque 5 in-lb (0.6 Nm) 22 in-lb (2.5 Nm) 17 in-lb (2.0 Nm) h> Assembly plug MD101 Allen key ISO2936-2 (SW 2) ISO2936-2.5 (SW 2.5) ISO2936-2.5 (SW 2.5) A 278