895 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.895

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 895 0895 ENG Lab2u

Hoffmann Group 47 Tools te make you better High precision T-nuts for aligning appliances and tools Precision ground all round, resulting in quick alignment times for appliances, vices etc., which are to be aligned parallel to the table slots of machine tools. A dial indicator is thus no longer required. Material: Steel C15, case-hardened. Stepped fixed T-nuts for screw attachment Accuracy: Application: Note: Dimension b=fit h6. These T-nuts are screwed in pairs into the standard 20 mm-wide tenon slot of jigs. By changing theT-nuts it is possible to work on several machines with different slot widths with one jig each. Size 20 see No. 375370 Jig Screw DIN 912 T-nut Machine table Slot size b, of the machine a 375365 Slot size b2 of the jig for screws DIN 84, DIN 912 Length Height H Slot size b, of the machine a 375365 Slot size b2 of the jig for screws DIN 84, DIN 912 Length Height H mm Stepped tenon ground mm Stepped tenon ground mm 10 21.38 20 M6x10 22 10 18 20.30 20 M6x16 25 10 12 20.30 20 M6x10 22 10 22 23.46 20 M6X16 32 12 14 20.30 20 M6X16 25 10 24 (26.43) 20 M6X16 32 12 16 20.30 20 M6X16 25 10 28 27.03 20 M6X16 32 12 Flat tenons for screw attachment Accuracy: Dimension b=fit h6. Application: Flat tenons are appropriate when a vice is always used on a machine with the same slot width. 37 5370 Slot size b, of the machine and jig a 375370 for screws DIN 84, DIN 912 Length Height H Slot size b, of the machine and jig a 375370 for screws DIN 84, DIN 912 Length Height H Flat tenon ground Flat tenon ground mm 10 5.90 M4x10 20 8 6.69 M6x16 22 10 12 5.90 M5x12 20 8 6.93 M6x16 22 10 14 6.39 M6X16 22 10 1 9.41 M6X16 32 12 16 6.39 M6x16 22 10 (9.41) M6x16 32 12 Loose tenons for adjustment Standard: Application: DIN 6323 These loose tenons are inserted sideways into the slots after rough alignment of the fixture. When transporting the fixture, there are then no tenons protruding underneath and the table cannot be damaged. 2 pieces are sufficient per machine, or 4 pieces for a double set-up. "“I J2/20- 18 bj _12/12 b2= 12 r b, = 12 22 - 28 Slot size b, of the machine mm a 375375 Slot size b2 Height H mm Height H, mm Length mm Loose tenon ground for adjustment of the jig mm 10 16.93 12 12 3.6 20 12/12 14.61 12 28.6 5.5 20 12/20 25.05 20 14 5.5 32 14 25.34 20 14 5.5 32 16 25.34 20 14 5.5 32 18 25.34 20 14 5.5 32 22 35.94 20 50.5 7 40 28 43.46 20 61.5 7 40 895