893 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.893

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 893 0893 ENG Lab2u

T-nuts Standard: DIN 508 Material: 375315- Quenched and tempered steel, strength 10. 37 5320 - Quenched and tempered steel, unhardened (= blank, without thread). Application: 375315 - For combination with studs or bolts. 37 5320 - Blanks for production of T-nuts with non-standard threads. Note: Full load-bearing capacity only when threaded for the entire nut length. T-slot nominal size 3 37 5315 a 375320 Thread Nut height Width Width Height k T-nut 375315 a e mm with threaded shank Blank mm 6 1.80 0.87 M5 8 5.7 10 4 8 1.40 0.87 M6 10 7.7 13 6 10 1.51 0.92 M8 12 9.7 15 6 12 1.51 1.08 M10 14 11.7 18 7 14 2.50 1.40 M12 16 13.7 22 8 16 3.66 1.60 M14 18 15.7 25 9 18 4.16 2.08 MIS 20 17.7 28 10 20 4.34 3.- M18 24 19.7 32 12 22 4.76 3.56 M20 28 21.7 35 14 24 8.12 5.45 M22 32 23.7 40 16 28 8.67 6.89 M24 36 27.7 44 18 32 21.88 - M27 40 31.6 50 20 36 18.22 - M30 44 35.6 54 22 T-nuts, long version Material: Quenched and tempered steel, strength 10. Application: Particularly suitable for high precision machines, to protect table slots. T-slot nominal size 375325 T-slot nominal size/ thread mm a 375325 Thread Nut height Width Width Height k mm Length T-nutlong mm a mm e mm 8/M6 3.50 M6 10 7.7 13 6 26 10/M8 3.32 M8 12 9.7 15 6 30 12/MI 0 3.50 M10 14 11.7 18 7 36 14/M12 3.88 M12 16 13.7 22 8 44 16/M14 5.- M14 18 15.7 25 9 50 18/M16 6.14 M16 20 17.7 28 10 56 20/MI 8 (8.81) M18 24 19.7 32 12 64 22/M20 10.75 M20 28 21.7 35 14 70 28/M24 20.10 M24 36 27.7 44 18 88 T-nut Rhombus Material: Quenched and tempered steel. Application: For the insertion of the T-nut from above through the top of the T-slot. (Load capacity lower than No. 375315 due to reduced bearing surface). Rotate rhombus. rti 37 5330 T-slot nominal size/ thread mm a 375330 Thread Nut height mm Width e mm Width a mm Height k mm Rhombus T-nut 12/M10 4.09 M10 14 18 11.7 7 14/MI 2 4.45 M12 16 22 13.7 8 16/M14 5.50 M14 18 25 15.7 9 18/MI 6 5.74 M16 20 28 17.7 10 20/M18 (7.68) M18 24 32 19.7 12 22/M20 9.01 M20 28 35 21.7 14 28/M24 14.81 M24 36 44 27.7 18 36/M30 29.11 M30 44 54 35.6 22 375315 375320 893