Milling Feed determination (starting values) Face / shoulder mill Mill type Feed per tooth fzo for ae Dc p- F 2010/F4080 Xtra-tec F 2146 dm F2010

Milling Feed determination (starting values) Face / shoulder mill Mill type Feed per tooth fzo for ae Dc p- F 2010/F4080 Xtra-tec F 2146 dm F2010/F2233 F2010/F4033 Xtra-tec Approach angle k Page fz0 in fz0 in fz0 in fz0 in Tool diameter or diameter range in F 2010 F 4080 2.000 12.000 3.000 10.000 F 2010 F 2233 1.000 12.000 1.500 12.000 2.000 12.000 Maximum cutting data ap max Lc in Unalloyed steel 1 p M K Low-alloyed steel High-alloyed steel and tool steel Stainless steel Stainless steel 2 Malleable cast iron Grey cast iron Cast iron with spheroidal graphite GGV (CGI) Aluminum wrought alloys Cast aluminum alloys Magnesium alloys Copper and copper alloys (bronze / brass) Heat-resistant alloys Titanium alloys Tungsten alloys Molybdenum alloys Hardened steel Hardened cast iron Thermoplasts Plastic, carbon-fiber reinforced Graphite (technical) Insert types SN X120512.. SN X120520.. SN X 1205ANN SNMX 160620 SNMX 160640 SNGX 1606ANN Correction factor Kae for the feed per tooth depending on the ratio of cut width ae to cutter diameter Dc 1.0 1.0 Correction factor Kap for the feed per tooth depending on the cutting depth ap fz fz0 Kae Kap F 180 F 130 F 132 F 156 F 4080 F 2233 2.000 6.000 0.750 4.000 0.157 / 0.394 0.157 / 0.394 N S OD .0504 OD .0605 OP .0504 5D ..09T3 5P..1204 1/1 1/2 ae / D 1/5 1/10 1/20 1/50 a 2 3 4 8 L a F 386 WALTER Valenite Technical information