Milling Feed WALTER determination (starting values) Face / shoulder mill Mill type Feed per tooth fzo for ae Dc dp- dp max F 2254 F 2010/F 2241 m

Milling Feed WALTER determination (starting values) Face / shoulder mill Mill type Feed per tooth fzo for ae Dc dp- dp max F 2254 F 2010/F 2241 m F 2250 Approach angle k 89° 45' Page F 192 Tool 0 or 0 range in fz0 in fz0 in F 2241 F 2010 F 2241 fz0 in Maximum cutting data ap Lc in Unalloyed steel 1 p M K Low-alloyed steel High-alloyed steel and tool steel Stainless steel Stainless steel 2 Malleable cast iron Grey cast iron Cast iron with spheroidal graphite GGV (CGI) Aluminum wrought alloys Cast aluminum alloys Magnesium alloys Copper and copper alloys (bronze / brass) Heat-resistant alloys Titanium alloys Tungsten alloys Molybdenum alloys Hardened steel Hardened cast iron Thermoplasts Plastic, carbon-fiber reinforced Graphite (technical) Insert types SNHQ 1205. SPHW 1204 WCD10 Correction factor Kae for the feed per tooth depending on the ratio of cut width ae to cutter diameter Dr fZ fZ0 Kae 1 and cast steel 2 and austenitic / ferritic 75° + 90 F 142 F 138 F 2241 50 160 mm 16 40 mm 25 160 mm 32 315 mm 63 200 mm 0.118 / 0.157 N S SP 0603 SP..09T3 SP 1204 1/1 1/2 ae / D 1/5 1/10 1/20 1/50 F 388 WALTER Valenite Technical information