2322 Каталог WALTER 2012 Металлорежущий инструмент и оснастка Valenite для станков Стр.F394

Каталог WALTER 2012 Инструмент и оснастка Valenite Стр. F394 2322 ENG Lab2u

WALTER Valenite Technical information Milling Feed determination (starting values) Slot mill Mill type Feed per tooth fzo for ae Dc dp- p max F 2237 Approach angle k Page Tool 0 or 0 range in fz0 in Maximum cutting data ap Lc in Unalloyed steel 1 p M K Low-alloyed steel High-alloyed steel and tool steel Stainless steel Stainless steel 2 Malleable cast iron Grey cast iron Cast iron with spheroidal graphite GGV (CGI) Aluminum wrought alloys Cast aluminum alloys Magnesium alloys Copper and copper alloys (bronze / brass) Heat-resistant alloys Titanium alloys Tungsten alloys Molybdenum alloys Hardened steel Hardened cast iron Thermoplasts Plastic, carbon-fiber reinforced Graphite (technical) Insert types SP..0603 LP..0703 SP .09T3 LP 15T3 SP 09T3 SP 1204 LP 1504 Correction factor Kae for the feed per tooth depending on the ratio of cut width ae to cutter diameter Dc 1.0 Correction factor Kap for the feed per tooth depending on the cutting depth ap fz fz0 Kae Kap 0.5 x Dc 0.75 x Dc 1 and cast steel 2 and austenitic / ferritic only possible if ap < 0.75 x Dc only with ae / Dc < 1/5 F 258 0.750 0.970 0.275 + 0.512 0.552 + 0.866 N S 1/1 1/2 ae / D 1/5 1/10 1/20 1/50 6 a 9 12 1 x D L a F 394